HP DB-102 manual Combustion AIR Supply, Flue Pipe & Chimney

Page 11

SCOTTY WOOD FURNACE – INSTRUCTION MANUAL

2.4.1COMBUSTION AIR SUPPLY

Air inlets of at least 200 square inches free area (1.5 in2/1000Btu) must be provided to the room occupied by the wood fired or oil fired furnace. These fresh air inlets must provide or allow free access of fresh outside air to the furnace. At no time or under any circumstances can a wood or oil-burning appliance be starved of combustion air.

The appliance must at all times be able to maintain the approved stack draft. The barometric draft regulator must be installed on the furnace smoke pipe in the same room or at least in such a way that there is unrestricted free passage of air between the combustion air inlet to the furnace or burner and the barometric draft regulator.

It is important to provide adequate combustion air to the furnace. It may be necessary to add a ventilator to an exterior wall of a closed furnace room or an airtight basement.

Operating a wood or oil fired appliance with inadequate combustion air could be hazardous.

2.4.2FLUE PIPE & CHIMNEY

The furnace must be located to meet a minimum venting distance needed between the furnace and the flue. It should also be ducted so that there are a minimum number of elbows used. The flue pipe must be installed with a gradual rise of 1/2” or more per foot from the furnace to the flue.

NEVER ALLOW THE SMOKE PIPE TO RUN DOWNHILL TO THE FLUE!

The smoke pipe and chimney should be at least 7 inches in diameter. The flue pipe or a chimney may be of different cross-sectional area than that of the appliance smoke pipe, provided that sufficient draft is available at the appliance. Space must be provided around the smoke pipe and the back of the furnace to allow easy access for the purpose of cleaning. Smoke pipes must not be lighter than 24 gauge black steel. All pipes must be securely fastened with at least 3 sheet metal screws at every joint, and properly supported.

Always meet or exceed flue pipe clearance specifications - 18” clearance from flue pipe to combustibles in all directions.

Connect the furnace only to an approved chimney suitable for solid fuel appliances and capable of venting the product of combustion. The chimney must be installed with proper clearances above roof and from adjacent structures and trees. If a masonry chimney is used it must be in good condition and be equipped with a tile liner. Flue thimble or flue pipe must not extend into the chimney flue, as it will reduce the draft.

Connect only to a flue or chimney capable of maintaining a negative draft of .05” wc at all times and conditions.

WARNING: If this setting is exceeded it could cause a solid fuel fire to burn out of control.

Scotty

11

Oct-06

Image 11
Contents Scotty Wood Furnace Table of Contents CFM SpecificationsWOOD-BURNING Operating Instructions IntroductionCase a Serious Creosote Fire Begins Storage of WoodCreosote Maximum SOLID-FUEL Charge MaintenanceCleaning Fig S102-6 Cleaning ProcedureControls Fig S102-3 Thermostat SafetyServicing Disposal of AshesElectrical Power Failure Applicable Standards Homeowner ChecklistInstallation Instructions Introduction to Installers Locating the Furnace Fig S102-2 UncratingFlue Pipe & Chimney Combustion AIR SupplyClearances Fig S102-1 Minimum safety clearances to combustibles areWarm AIR Duct & Plenum Clearances Duct ConnectionL4064R Wood Furnace/Limit Control T822 Room Thermostat Wood FurnaceM847 Damper Motor Installers Final Checklist Page Page Page Page Page Page Page Terms and Conditions of Warranty Year Warranty

DB-102 specifications

The HP DB-102 is a powerful and compact digital device designed to cater to a variety of computing needs, particularly suited for both personal and professional environments. This innovative model from Hewlett-Packard combines advanced technology with user-centric design, making it an ideal choice for everyday tasks as well as more demanding applications.

One of the main features of the HP DB-102 is its robust processing capability, driven by an efficient multi-core processor. This ensures that the device can handle simultaneous tasks with ease, providing a smooth and responsive user experience. The device is equipped with ample RAM, allowing for seamless multitasking and efficient operation of multiple applications without lag.

The HP DB-102 also boasts superior graphics performance, suitable for both casual gaming and graphic-intensive applications. With enhanced GPU capabilities, users can enjoy crisp visuals and improved rendering speeds, making it a perfect fit for designers, gamers, or anyone who values high-quality graphics.

In terms of storage, the HP DB-102 is equipped with a high-capacity SSD that not only accelerates boot times but also provides quick access to files and reduced load times for applications. This storage solution contributes significantly to the overall performance of the device, allowing users to store large amounts of data without sacrificing speed or efficiency.

The design of the HP DB-102 emphasizes portability and connectivity. Its lightweight and compact structure make it easy to transport, ideal for users on the go. Additionally, it features a range of connectivity options, including USB ports, HDMI output, and Bluetooth technology, ensuring compatibility with a variety of peripherals and external devices.

Battery life is another strong point of the HP DB-102. With an optimized power management system, the device can sustain extended usage times on a single charge, making it a reliable choice for users who require mobility without the constant need for recharging.

Furthermore, the HP DB-102 runs on the latest operating system, providing users with a familiar interface packed with productivity-enhancing features. Regular updates and security measures help to keep the system secure and up-to-date with the latest software developments.

In conclusion, the HP DB-102 stands out as a versatile and efficient digital device, offering a blend of power, performance, and portability. Its comprehensive range of features makes it suitable for a wide array of users, from students to professionals, all seeking a reliable computing solution.