HP DB-102 manual Duct Connection, Warm AIR Duct & Plenum Clearances

Page 13

SCOTTY WOOD FURNACE – INSTRUCTION MANUAL

WARM AIR DUCT & PLENUM CLEARANCES

The following clearances must be observed and must meet all local building, electrical and fire codes. Follow the National Standard of Canada, Installation Code for Solid Fuel Burning Appliances and Equipment, CSA-B365-01; the National Board of Fire Underwriters and in the US the NFPA codes.

The KERR SCOTTY Wood Furnace warm air plenum and first 6 feet (1.8 m) of warm air supply duct in any direction must be installed observing a minimum of 6 inches (155

mm)clearance from the joists or combustible materials. Beyond the first 6ft (1.8 m) of supply duct, a 2 inches (55 mm) minimum clearance must be maintained between the warm air supply ducts and all joists or combustible material (See Fig. S102-1)

Return air ducts, including main ducts and branch ducts, on solid fuel burning warm air furnaces shall be installed to provide at least 6 inches (150mm) clearance to combustible construction for the first 6 feet (1.8 m) away from the furnace plenum.

It is recommended that a non-combustible rigid board be fastened on the underside of the floor joists in the area of the ceiling above the furnace, warm air ducts and smoke pipe.

2.6DUCT CONNECTION

See figure S102-7 for Approved Furnace Ductwork Configurations. See figure S102-7 for Prohibited Furnace Ductwork Configurations.

The use of A/C coils is not recommended unless special arrangements are made.

Minimum cross-sectional area of ductwork from furnace should be approximately 180 square inches with equal or larger size for return air.

The furnace must not be installed as a gravity only system as the controls are not designed for this type of operation.

Approved ductwork configurations can be seen in diagram S102-7.

Prohibited ductwork configurations can be seen in diagram S102-7.

The main supply duct for the stand-alone wood furnace in not allowed to be located lower than the plenum connection to the furnace. Also no section of the supply main duct is to have any downward slope, which would drop the main supply duct more than half of the height of the main supply duct. At least 75% of all takeoff supplies shall terminate above the main supply duct.

Scotty

13

Oct-06

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Scotty Wood Furnace Table of Contents CFM SpecificationsWOOD-BURNING Operating Instructions IntroductionCreosote Storage of WoodCase a Serious Creosote Fire Begins Cleaning Fig S102-6 MaintenanceCleaning Procedure Maximum SOLID-FUEL ChargeServicing SafetyDisposal of Ashes Controls Fig S102-3 ThermostatElectrical Power Failure Installation Instructions Introduction to Installers Homeowner ChecklistApplicable Standards Locating the Furnace Fig S102-2 UncratingFlue Pipe & Chimney Combustion AIR SupplyClearances Fig S102-1 Minimum safety clearances to combustibles areWarm AIR Duct & Plenum Clearances Duct ConnectionM847 Damper Motor T822 Room Thermostat Wood FurnaceL4064R Wood Furnace/Limit Control Installers Final Checklist Page Page Page Page Page Page Page Terms and Conditions of Warranty Year Warranty

DB-102 specifications

The HP DB-102 is a powerful and compact digital device designed to cater to a variety of computing needs, particularly suited for both personal and professional environments. This innovative model from Hewlett-Packard combines advanced technology with user-centric design, making it an ideal choice for everyday tasks as well as more demanding applications.

One of the main features of the HP DB-102 is its robust processing capability, driven by an efficient multi-core processor. This ensures that the device can handle simultaneous tasks with ease, providing a smooth and responsive user experience. The device is equipped with ample RAM, allowing for seamless multitasking and efficient operation of multiple applications without lag.

The HP DB-102 also boasts superior graphics performance, suitable for both casual gaming and graphic-intensive applications. With enhanced GPU capabilities, users can enjoy crisp visuals and improved rendering speeds, making it a perfect fit for designers, gamers, or anyone who values high-quality graphics.

In terms of storage, the HP DB-102 is equipped with a high-capacity SSD that not only accelerates boot times but also provides quick access to files and reduced load times for applications. This storage solution contributes significantly to the overall performance of the device, allowing users to store large amounts of data without sacrificing speed or efficiency.

The design of the HP DB-102 emphasizes portability and connectivity. Its lightweight and compact structure make it easy to transport, ideal for users on the go. Additionally, it features a range of connectivity options, including USB ports, HDMI output, and Bluetooth technology, ensuring compatibility with a variety of peripherals and external devices.

Battery life is another strong point of the HP DB-102. With an optimized power management system, the device can sustain extended usage times on a single charge, making it a reliable choice for users who require mobility without the constant need for recharging.

Furthermore, the HP DB-102 runs on the latest operating system, providing users with a familiar interface packed with productivity-enhancing features. Regular updates and security measures help to keep the system secure and up-to-date with the latest software developments.

In conclusion, the HP DB-102 stands out as a versatile and efficient digital device, offering a blend of power, performance, and portability. Its comprehensive range of features makes it suitable for a wide array of users, from students to professionals, all seeking a reliable computing solution.
Top Page Image Contents