HP DB-102 manual Maximum SOLID-FUEL Charge, Maintenance, Cleaning Fig S102-6, Cleaning Procedure

Page 6

SCOTTY WOOD FURNACE – INSTRUCTION MANUAL

1.4MAXIMUM SOLID-FUEL CHARGE

The maximum level for a solid-fuel charge is the middle of the loading door, or the level of the handle. DO NOT OVERFILL.

The KERR SCOTTY Wood Furnace will accept whole or split logs up to 27 in. (686 mm) long, but a 24 in (610 mm) log length is recommended for convenience and ease in handling.

Maximum damper gate opening is 11/16”. Do not tamper or adjust to greater opening in an attempt to increase fire or over-firing and hazard may result.

1.5MAINTENANCE

Some regular maintenance is necessary on the KERR SCOTTY furnace. A good practice is to establish a routine for the storage of fuel, care of the appliance, and firing techniques.

1.5.1CLEANING (Fig S102-6)

The KERR SCOTTY Wood Furnace must be cleaned regularly to maintain top efficiency. The furnace needs cleaning more often when burning green wood, or during long periods of low fire. When the KERR SCOTTY Wood Furnace is first installed the furnace heat exchanger should be checked visually from the firebox and smoke pipe hole every week to determine the rate at which creosote or ash is accumulating within the furnace. Cleaning should be done whenever there is more than 1/4 inch of build-up on the heat exchanger or 3 inches of ash in the base. If the wood furnace is to be left unused for an extended period of time (more than one month) then the appliance should be cleaned of all ash and residual left from the burning of wood. See fig. S102-6

CLEANING PROCEDURE:

1)Make sure fire is completely out and the furnace has cooled.

2)Remove the smoke pipe located on the rear of the furnace heat exchanger.

3)The heat exchanger is now accessible for cleaning.

4)Use the scraper provided to remove all soot and ash from the furnace heat exchanger and exposed surfaces.

5)Scrape all residues in the top heat exchanger towards the front of the furnace where it will fall into the firebox.

6)Always check flue pipe for creosote or ash build-up in the pipe and clean if necessary.

7)Reinstall smoke pipe making sure that all joints are secured with at least 3 sheet metal screws.

8)Check chimney cleanout for ash build-up and remove any accumulation.

9)Residue may be removed from the firebox or left to be burnt during the next fire. It is good practice to leave a layer of ash approximately one inch deep in the base of the firebox.

Scotty

6

Oct-06

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Scotty Wood Furnace Table of Contents Specifications CFMOperating Instructions Introduction WOOD-BURNINGStorage of Wood CreosoteCase a Serious Creosote Fire Begins Cleaning Procedure MaintenanceCleaning Fig S102-6 Maximum SOLID-FUEL ChargeDisposal of Ashes SafetyServicing Controls Fig S102-3 ThermostatElectrical Power Failure Homeowner Checklist Installation Instructions Introduction to InstallersApplicable Standards Uncrating Locating the Furnace Fig S102-2Combustion AIR Supply Flue Pipe & ChimneyMinimum safety clearances to combustibles are Clearances Fig S102-1Duct Connection Warm AIR Duct & Plenum ClearancesT822 Room Thermostat Wood Furnace M847 Damper MotorL4064R Wood Furnace/Limit Control Installers Final Checklist Page Page Page Page Page Page Page Terms and Conditions of Warranty Year Warranty

DB-102 specifications

The HP DB-102 is a powerful and compact digital device designed to cater to a variety of computing needs, particularly suited for both personal and professional environments. This innovative model from Hewlett-Packard combines advanced technology with user-centric design, making it an ideal choice for everyday tasks as well as more demanding applications.

One of the main features of the HP DB-102 is its robust processing capability, driven by an efficient multi-core processor. This ensures that the device can handle simultaneous tasks with ease, providing a smooth and responsive user experience. The device is equipped with ample RAM, allowing for seamless multitasking and efficient operation of multiple applications without lag.

The HP DB-102 also boasts superior graphics performance, suitable for both casual gaming and graphic-intensive applications. With enhanced GPU capabilities, users can enjoy crisp visuals and improved rendering speeds, making it a perfect fit for designers, gamers, or anyone who values high-quality graphics.

In terms of storage, the HP DB-102 is equipped with a high-capacity SSD that not only accelerates boot times but also provides quick access to files and reduced load times for applications. This storage solution contributes significantly to the overall performance of the device, allowing users to store large amounts of data without sacrificing speed or efficiency.

The design of the HP DB-102 emphasizes portability and connectivity. Its lightweight and compact structure make it easy to transport, ideal for users on the go. Additionally, it features a range of connectivity options, including USB ports, HDMI output, and Bluetooth technology, ensuring compatibility with a variety of peripherals and external devices.

Battery life is another strong point of the HP DB-102. With an optimized power management system, the device can sustain extended usage times on a single charge, making it a reliable choice for users who require mobility without the constant need for recharging.

Furthermore, the HP DB-102 runs on the latest operating system, providing users with a familiar interface packed with productivity-enhancing features. Regular updates and security measures help to keep the system secure and up-to-date with the latest software developments.

In conclusion, the HP DB-102 stands out as a versatile and efficient digital device, offering a blend of power, performance, and portability. Its comprehensive range of features makes it suitable for a wide array of users, from students to professionals, all seeking a reliable computing solution.
Top Page Image Contents