HP ZR24w, ZR22w manual Using the Auto-Adjustment Function

Page 26

Using the Auto-Adjustment Function

You can optimize the screen performance for the VGA (analog) input by using the OK/auto button on the monitor and the auto-adjustment pattern software utility on the CD provided.

Do not use this procedure if the monitor is using a DVI or DisplayPort input. If the monitor is using a VGA (analog) input, this procedure can correct the following image quality conditions:

●Fuzzy or unclear focus

●Ghosting, streaking or shadowing effects

●Faint vertical bars

●Thin, horizontal scrolling lines

●An off-center picture

To use the auto-adjustment feature:

1.Allow the monitor to warm up for 20 minutes before adjusting.

2.Press the OK/auto button on the monitor front panel.

●You can also press the Menu button, then select Image Control > Auto-Adjustmentfrom the OSD Main Menu. Refer to Adjusting the Monitor Settings on page 20 in this chapter.

●If the result is not satisfactory, continue with the procedure.

3.Insert the CD in the disc drive. The CD menu is displayed.

4.Select Open Auto-Adjustment Software. The setup test pattern is displayed.

5.Press the OK/auto button on the monitor front panel to produce a stable, centered image.

6.Press the ESC key or any other key on the keyboard to exit the test pattern.

18 Chapter 4 Operating the Monitor

ENWW

Image 26

Contents HP ZR22w and ZR24w LCD Monitors Page About This Guide Iv About This Guide Table of contents Appendix a Troubleshooting Appendix D LCD Monitor Quality and Pixel Policy Viii Product Features HP ZR22w and ZR24w ModelsEnww Safety and Maintenance Guidelines Important Safety InformationShipping the Monitor Maintenance GuidelinesCleaning the Monitor Setting Up the Monitor Installing the Monitor Pedestal Base1Rear Components Rear ComponentsHP ZR22w and ZR24w Models Component FunctionRouting and Connecting the Cables Enww Connecting USB Devices Adjusting the Monitor9Adjusting the Height Setting Up the Monitor Turning on the Monitor 10Pivoting the MonitorRemoving the Monitor Pedestal Base Mounting the Monitor Enww Installing a Cable Lock Locating the Rating LabelsInformation File Operating the MonitorSoftware and Utilities Image Color Matching FileDownloading from the Internet Installing the .INF and .ICM FilesInstalling from the CD Using the Auto-Adjustment Function Control Function Front Panel Controls1Monitor Front Panel Controls Adjusting the Monitor Settings Using the On-Screen Display MenuOSD Menu Selections Icon Main Menu Submenu Description2OSD Menu OSDMonitor is powered on. Select the location to DVI Using the HP Display Assistant Utility Optimizing Digital ConversionIdentifying Monitor Conditions Sleep Timer Mode HP Display LiteSaver Installing the HP Display LiteSaver Software3HP Display LiteSaver Configuration Options Select This Option To Do ThisSRGB Support Changing the Color TemperatureInstalling the sRGB ICM File for Microsoft Windows Vista Installing the sRGB ICM File for Microsoft Windows Click Change display settings Click Advanced settingsProblem Possible Cause Solution TroubleshootingSolving Common Problems Check Video Cable is displayed onSettings to 1920 × 1080 @ 60Hz Power Button Lockout is displayedPreparing to Call Technical Support ZR22w Model Technical SpecificationsTable B-1ZR22w Specifications Table B-2ZR24w Specifications ZR24w ModelPreset Pixel Format Horz Freq kHz Vert Freq Hz Recognizing Preset Display ResolutionsTable B-3Factory Preset Modes ZR22w ModelZR24w Model Table B-4Factory Preset ModesEntering User Modes Energy Saver Feature Modifications Agency Regulatory NoticesFederal Communications Commission Notice CablesEuropean Union Regulatory Notice Canadian NoticeAvis Canadien Japanese Notice Korean Notice Power Cord Set Requirements German Ergonomics NoticeEnergy Star Qualification Select Models Japanese Power Cord RequirementsProduct Environmental Notices Materials Disposal Turkey EEE Regulation LCD Monitor Quality and Pixel Policy