HP ZR24w, ZR22w manual Dvi

Table 4-2OSD Menu (continued)

Icon	Main Menu	Submenu	Description
	Information		Selects and displays important information about the
			monitor.
		Current Settings	Provides the current input video mode.
		Recommended	Provides the recommended resolution mode and
		Settings	refresh rate for the monitor.
		Serial Number	Reports the serial number of the monitor. The serial
			number is needed if contacting HP technical support.
		FW Version	Reports the firmware version of the monitor.
		Backlight Hours	Reports the total hours of backlight operation.
		Service Support	http://www.hp.com/support
	Factory Reset		Returns all OSD menu settings and DDC/CI controls
			to the factory default settings, except the Language.
	Source Control		Selects the video input signal. DisplayPort is the
			factory default.
		DisplayPort	Selects DisplayPort as the video input signal.
		DVI	Selects DVI as the video input signal.
		VGA	Selects VGA as the video input signal.
		Default Source	Selects the default or primary video input signal when
			the monitor is connected to two active and valid video
			sources. The monitor will automatically determine the
			video format. The choices are:
			●	DisplayPort
			●	DVI
			●	VGA
			The factory default is DisplayPort.
		Auto-Switch Source	Turns the system's automatic video signal input to On
			or Off. The factory default is On.
		Source Detection	This option is displayed in the OSD when a DisplayPort
			input is selected. You can set Source Detection to:
			●	Always Active
			●	Low Power
			The factory default is Low Power.
	Exit		Exits the OSD menu screen.

24 Chapter 4 Operating the Monitor ENWW