HP WF1907, w2007, w2207, vp19 Setting Up the Monitor, Unpacking the Monitor, Installing the Monitor

4

Setting Up the Monitor

Unpacking the Monitor

1.Unpack the monitor. Make sure all contents are included. Store the packing box.

2.Turn off the computer and other attached devices.

3.Determine whether the monitor will be desktop-mounted or wall-mounted. See “Installing the Monitor.”

4.Prepare a flat area to assemble the monitor. You may need a flat, soft, protected area for placing the monitor screen-down while preparing it for installation.

5.You need a Phillips screwdriver for preparing the monitor for wall-mounting. You may need a straight-slot screwdriver to secure some cables.

Installing the Monitor

You can install the monitor on a desktop or wall-mount it. Place the monitor in a convenient, well-ventilated location near your computer.

If the monitor will be installed on a:

■Desktop or table, see “Installing the HP LCD Monitor on a Desktop.”

■Wall, swing arm, or other mounting fixture, see “Wall-Mounting the Monitor (Mounting Fixture not Supplied).” Connect the monitor cables after you have installed the montior.

Installing the HP LCD Monitor on a Desktop

Follow the instructions for your monitor type.

Unfolding the double-hinged monitor

ÅWARNING: Do not place the double-hinged monitor face down when you first take it out of the box. The hinge can spring up and cause serious damage.

1.Set the monitor screen-side up on a flat surface.

User’s Guide 4–1