HP w2007, w2207, vp19, WF1907 LCD Monitor Quality and Pixel Policy, Power Cord Set Requirements

Page 44

Technical Specifications

LCD Monitor Quality and Pixel Policy

The HP LCD Monitor uses high-precision technology, manufactured according to high standards, to help guarantee trouble-free performance. Nevertheless, the display may have cosmetic imperfections that appear as small bright or dark spots. This is common to all LCD displays used in products supplied by all vendors and is not specific to the HP LCD Monitor. These imperfections are caused by one or more defective pixels or subpixels.

■A pixel consists of one red, one green, and one blue subpixel.

■A defective whole pixel is always turned on (a bright spot on a dark background), or it is always off (a dark spot on a bright background). The first is the more visible of the two.

■A defective subpixel (dot defect) is less visible than a defective whole pixel, and is small and only visible on a specific background.

To locate defective pixels, the monitor should be viewed under normal operating conditions and in normal operating mode at a supported resolution and refresh rate, from a distance of approximately 50 cm (16 inches).

We expect that, over time, the industry will continue to improve its ability to produce displays with fewer cosmetic imperfections, and we will adjust guidelines as improvements are made.

For more information about your HP LCD Monitor, refer to the HP Web site at: http://www.hp.com/support

Power Cord Set Requirements

The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the monitor to operate on input voltages between 100–240Vv, 50/60 Hz, 1.5A.

The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use in the country/region where you purchased the equipment.

If you need to obtain a power cord for a different country/region, you should purchase a power cord that is approved for use in that country/region.

The power cord must be rated for the product and for the voltage and current marked on the product’s electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the cross-sectional area of the wire must be a minimum of 0.75 mm² or 18AWG, and the length of the cord must be between 4.94 ft. (1.5 m) and 12 ft. (3.6 m). If you have questions about the type of power cord to use, contact your HP-authorized service provider.

A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product.

B–6

User’s Guide

Page 43 Page 45
Image 44
Page 43 Page 45
Contents User’s Guide USA Notational Conventions User’s Guide Contents Troubleshooting Technical SpecificationsOperating the Monitor Agency Regulatory NoticesHP LCD Monitors Product FeaturesFeatures Cantilever base Column base Safety and Maintenance Guidelines Important Safety InformationMaintenance Guidelines Safety PrecautionsCleaning the Monitor Removing the cantilever base Preparing the Monitor for ShippingRemoving the Monitor Base Removing the column base Removing the column baseFolding the Double-Hinged Monitor Preparing the Monitor for Shipping Setting Up the Monitor Installing the MonitorInstalling the HP LCD Monitor on a Desktop Unpacking the MonitorLift and lower the base hinge for proper viewing Assembling the cantilever base Assembling the column baseWall-Mounting the Monitor Mounting Fixture not Supplied Preparing the double-hinged monitor for wall-mountingPreparing the cantilever-base monitor for wall-mounting Preparing the column-base monitor for wall-mountingConnecting the VGA Analog and/or DVI-D Digital Cable To reinstall the desktop pedestal and base for the monitorTo connect the VGA cable To connect the DVI-D cableConnecting USB Devices to the Monitor Connecting the Audio CableConnecting the USB Hub Cable Connecting the Power Cable Read the warning belowCable Management Adjusting the Tilt Adjusting the Swivel Select Models Only Adjusting the Height Select Models OnlyPivoting the Monitor Select Models Only Keyboard Parking Setting Up the Monitor Installing Drivers Operating the MonitorCD Software and Utilities Downloading from the World Wide WebUsing the Auto-Adjustment Function My Display OSD SoftwareUsing the Onscreen Display OSD Front-Panel ControlsOSD Menu Selections Icon Main Menu Submenu Options DescriptionHorizontal OSD Position Changes the viewing Set Current Time Sets the current time in hours Selecting the Video Input Connectors Adjusting Screen QualityIdentifying Monitor Conditions Optimizing Analog VideoPower-Saver Feature High-Bandwidth Digital Content Protection HdcpTroubleshooting Solving Common ProblemsUsing the World Wide Web Preparing to Call Technical Support Locating the Rating LabelTechnical Specifications SpecificationsTechnical Specifications Preset Video Modes WF1907 and w1907 supports preset modes 1 through W2207 supports preset modes 1 through Power Cord Set Requirements LCD Monitor Quality and Pixel PolicyAgency Regulatory Notices Federal Communications Commission NoticeModifications CablesMaterials Disposal Canadian NoticeAvis Canadien European Union Regulatory NoticeAgency Regulatory Notices HP Recycling Program Pbde

vp19, w2207, WF1907, w2007 specifications

The HP w2007, WF1907, w2207, and vp19 are versatile and innovative monitors that cater to a variety of user needs, whether for professional, gaming, or everyday use.

Starting with the HP w2007, this monitor features a 20-inch widescreen display with a resolution of 1680x1050 pixels. The monitor utilizes an LCD technology that enhances color accuracy and reduces blurring during fast action scenes. Its 5ms response time ensures smooth visuals and makes it an excellent choice for gaming and watching movies. The HP w2007 also boasts a 4000:1 dynamic contrast ratio, providing vibrant colors and deeper blacks, which enhances the overall viewing experience. Its adjustable height, tilt, and pivot features allow users to customize their viewing angles for enhanced comfort.

Next, the HP WF1907 is a 19-inch widescreen model designed for users seeking reliability and performance. It comes with a resolution of 1440x900 pixels, making it suitable for everyday applications like browsing, word processing, and casual gaming. The WF1907 features a response time of 5ms, ensuring that images remain clear during motion. The monitor is also equipped with HP’s BrightView technology, which provides enhanced brightness and better color performance in various lighting conditions. Light and slim, the WF1907 is perfect for users looking to save desk space without sacrificing quality.

The HP w2207 is another noteworthy option, featuring a 22-inch display with a resolution of 1680x1050 pixels. This model offers a wide viewing angle due to its IPS technology, providing consistent colors and brightness regardless of the angle from which it's viewed. The w2207 also includes integrated speakers, which is a valuable addition for users who prefer a clutter-free workspace. With a response time of 5ms and a contrast ratio of 1000:1, this monitor is ideal for gaming and multimedia use.

Finally, the HP vp19 is aimed at professional users, featuring a 19-inch display with a focus on color accuracy and sharp images. With a 1280x1024 resolution, it is particularly well-suited for graphic design and video editing workflows. The vp19 employs advanced LCD technology that minimizes glare and reflections, enhancing productivity in office settings.

Together, these monitors represent HP's commitment to delivering technology that meets diverse user requirements through cutting-edge design and features. Whether for work or entertainment, they provide reliable performance and quality visuals, making them valuable assets in any computing environment.
Top Page Image Contents