HP P1130 P4819A manual Adjusting the quality of the picture Screen, Select

Page 21

HP 21” Color Monitor User’s Guide

Adjusting the quality of the picture (SCREEN)

Adjusting the quality of the picture (SCREEN)

The SCREEN settings allow you to adjust the quality of the picture by controlling the moire and the landing.

•If the color is irregular at the corners of the screen, adjust the landing.

•If elliptical or wavy patterns appear on the screen, cancel the moire.

The CANCEL MOIRE and MOIRE ADJUST settings are stored in memory for the current input signal. All other settings are stored in memory for all input signals.

1Press the button. The MENU appears on the screen.

2Press the / buttons to highlight SCREEN and

press the button. The SCREEN menu appears on the screen.

3Press the / buttons to select the desired adjustment

item. Then press the button.

4Press the / buttons to make the adjustment.

Select	To
	reduce any color irregularities in the screen’s top left corner to a
LANDING	minimum.

	reduce any color irregularities in the screen’s top right corner to a
LANDING	minimum.

	reduce any color irregularities in the screen’s bottom left corner to a
LANDING	minimum.

	reduce any color irregularities in the screen’s bottom right corner to a
LANDING	minimum.

	adjust the level of moire cancellation until it is at minimum.
CANCEL MOIRE

	degauss the monitor.

	reset all SCREEN settings.

20 English

Image 21

Contents Hp 21-inch color Monitor P4819a Inch Color Monitor HP 21 Color Monitor User’s Guide Important Safety Instructions Minimizing Energy Consumption Minimizing Eye StrainWhat Your New Monitor Offers Setting Up Your Monitor Where to Place the MonitorConnecting the Cables How To Install The Drivers WindowsWindows XP Windows 95 or Windows Power Switch Using Your MonitorAdjustment Button + # Adjustment ButtonInput Switch Brightness and Scroll Up ButtonContrast and Scroll Down Button To select the menu you want to adjust Using the On-Screen MenuTo adjust the menu To display the MenuTo reset to English Selecting the On-Screen Menu LanguageTo select a language of your choice Displaying the Current Input Signal Selecting the Input SignalNavigating the menu OSD and changes the menu’s Customizing Your Monitor Adjusting the brightness and contrastAdjusting the size of the picture SIZE/CENTER Adjusting the picture SIZE/CENTERAdjusting the centering of the picture SIZE/CENTER Automatically sizing and centering the picture AutoSelect To Adjusting the shape of the picture GeometrySelectTo Adjusting the convergence ConvergenceSelect Adjusting the quality of the picture ScreenExample of moire Adjusting the color of the picture Color Selecting the color modePreset mode Expert mode Variable modeRestoring the color from the Easy or sRGB menus SRGB modeMode green power indicator on for at least 30 minutes. If To cancel the control lock Additional settings OptionDegaussing the screen Changing the menu positionResetting all of the adjustment data for all input signals Resetting the adjustmentsResolution Refresh Rate/Hz Supported Video ModesFactory Optimized Modes If thin lines appear on your screen damper wires TroubleshootingIf no Input Signal appears on the screen On-screen messagesIf OUT of Scan Range appears on the screen No picture and LED is on No picture and LED is offColors are not pure Picture is not centered370 MHz Technical SpecificationsEnvironmental Information Care and CleaningWarranty repair or replacement Model Hardware WarrantyService Provided GeneralProof of Purchase and Warranty Period Limitation of WarrantyLimitation of Liability and Remedies Part II Year 2001 Warranty Declaration of Conformity Regulatory InformationRay Radiation Notice Hinweis für Deutschland Geräuschemission TCO CFCs freons