Setting Up the Monitor
ÄCAUTION: The screen is fragile. Placing the monitor screen down on a flat, soft area prevents scratches, defacing, or breakage.
2.Remove the hinge cover 1 as shown in the following illustration, and set it aside. Three screws and the hinge are exposed.
3.Holding the pedestal so it cannot fall, use a magnetic screwdriver to remove the single screw close to the hinge, and then remove the other two screws 2. If necessary, move the pedestal so that all three screws are accessible.
4.Slide the pedestal off the monitor panel 3.
2
1
3
Wall-mounting the vs monitor
User’s Guide |