HP L919g manual Identifying Monitor Conditions, Optimizing Digital Conversion

Operating the Monitor

Optimizing Digital Conversion

This monitor contains advanced circuitry that allows the flat panel screen to function like a standard monitor. Two controls in the on-screen display can be adjusted to improve image performance: Clock and Phase. Use these controls only when the auto-adjust function does not provide a satisfactory image.

✎The Clock must first be set correctly since the Phase settings are dependent on the main Clock setting.

■Clock—Increase/decrease the value to minimize any vertical bars or stripes visible on the screen background.

■Phase—Increase/decrease the value to minimize video distortion or video jitter.

✎When using the controls, you will obtain the best results by using the Auto-Adjustment pattern application provided on the CD.

✎When adjusting the Clock and Phase values, if the monitor images become distorted, continue adjusting the values until the distortion disappears. To restore the factory settings, select the Factory Reset menu in the on-screen display.

Identifying Monitor Conditions

Special messages will appear on the monitor screen when identifying the following monitor conditions:

■Out of Range— Indicates the monitor does not support the input signal because the resolution and/or refresh rate are set higher than the monitor supports. Set the resolution and refresh rate for 1280 x 1024 at 60 Hz. Restart your computer for the new settings to take effect.

4–12 User Guide