HP S1922 manual Selecting Video Input Connectors, Identifying Monitor Conditions

Page 23

Selecting Video Input Connectors

The input connectors are:

•VGA connector (analog)

•DVI-D connector (digital) (Select Models)

The monitor automatically determines which inputs have valid video signals, and displays the image.

You can connect the VGA cable, the DVI-D cable, or both. If both cables are installed, the default input selection is DVI.The source of input can be switched using the Input Select option in the OSD menu.

Identifying Monitor Conditions

Special messages appear on the monitor screen for the following monitor conditions:

Input Signal Out of Range - When the Hsync Frequency, Vsync Frequency or Resolution is out of the monitor support range, will show this message. This message will be flying.

No Signal - When the video cable is not connected, or the video cable is connected but there is no Active signal input, will show this message, after 9 seconds the monitor will enter power saving. This message location is at the position setting in "OSD Setup" item.

Auto Adjustment in Progress - Indicates the auto adjustment function is active. See "Adjusting Screen Quality" in this chapter.

Adjusting Screen Quality

The auto adjustment feature automatically fine-tunes the image quality for display size, position, clock, and phase each time a new video mode is displayed. For more precise adjustments of VGA input, run the Auto Adjustment software on the CD. If you want additional image quality improvement, use the Clock and Phase controls of the monitor to fine tune the image. See "Optimizing Analog Video" in this chapter.

Optimizing Analog Video

Some monitors contain advanced circuitry that allow the monitor to function as a standard analog monitor. Two controls in the OSD menu can be adjusted to improve analog image performance:

Clock - Increase or decrease the value to minimize any vertical bars or stripes visible on the screen background.

Phase - Increase or decrease the value to minimize video distortion or video jitter.

Use these controls only when the auto adjustment function does not provide a satisfactory monitor image in analog mode. To obtain the best results:

1.Allow the monitor to warm up for 30 minutes before adjusting.

2.Access the OSD menu, then select Image Setup.

3.Set the main Clock settings correctly first, because the Phase settings depend on the main Clock settings.When adjusting the Clock and Phase values, if the monitor images become distorted,continue adjusting the values until the distortion disappears. To restore the factory settings, access the OSD menu, select Factory Reset , and then select Yes .

17 Appendix 4. Operating the Monitor

ENWW

Page 22 Page 24
Image 23
Page 22 Page 24
Contents S1922/S1922a and S2022a LCD Monitor User Guide Page Document Part Number 603427-001 First Edition January About This Guide Table of Contents Troubleshooting Technical Specifications HP LCD Monitors Product FeaturesSafety Precautions Safety and Maintenance GuidelinesImportant Safety Information Cleaning the Monitor Maintenance GuidelinesPreparing the monitor for desktop use Setting Up the MonitorInstalling the Monitor Unpacking the MonitorLocation of screw securing base to monitor Preparing the monitor for wall-mountingEnww Connecting the VGA Analog Cable or DVI-D Digital Cable Connecting Monitor CablesConnecting the Audio Cable Select Models Connecting the Power Cable 10 Tilt adjustment Adjusting the TiltOperating the Monitor Installing DriversInstalling the monitor driver software from the CD Downloading updated drivers from the InternetNo. Icon Description Front-Panel ControlsUsing the On-Screen Display OSD Image Color Temp OSD Setup SUB Optimizing Analog Video Selecting Video Input ConnectorsAdjusting Screen Quality Identifying Monitor ConditionsPower-Saver Feature Problem Solution Problem & Question Possible Solutions TroubleshootingSolving Common Problems Locating the Rating Label Have the following information available when you callGetting Support from hp.com Preparing to Call Technical SupportHP LCD Monitors Technical SpecificationsTable B-2 Model S1922a Table B-3 Model S2022a Table B-5 Factory Preset Video Input Modes, S2022a Preset Video ModesLCD Monitor Quality and Pixel Policy Cables Agency Regulatory NoticesFederal Communications Commission Notice ModificationsGerman Ergonomics Notice Canadian NoticeAvis Canadien Japanese Notice Korean Notice Power Cord Set Requirements Chemical Substances HP Recycling Program Japanese Power Cord RequirementsProduct Environmental Notices Materials Disposal Restriction of Hazardous Substances RoHS Turkey EEE Regulation
Related manuals
Manual 37 pages 8.15 Kb

S1922 specifications

The HP S1922 is a versatile and efficient 18.5-inch LED backlit monitor designed to enhance both productivity and entertainment experiences in various environments. With its sleek design and powerful features, the S1922 is an excellent choice for home offices, educational settings, and general computing tasks.

One of the standout features of the HP S1922 is its vivid display. The monitor offers a resolution of 1366 x 768 pixels, delivering clear and sharp visuals. This resolution effectively caters to daily computing needs, whether it’s browsing the web, watching videos, or working on documents. The 5 ms response time ensures smooth motion, making it suitable for light gaming and multimedia playback.

In terms of connectivity, the HP S1922 is equipped with a VGA port, allowing for easy connection to a variety of devices, including laptops and desktops. This feature provides flexibility for users who might need to switch between different devices or share the monitor in a multi-user environment.

The monitor also comes with integrated speakers, which means users can enjoy audio without the need for external speakers, saving desk space and reducing clutter. Additionally, the tilt adjustment feature allows users to customize the viewing angle to their preference, promoting comfort during prolonged use.

From a technology standpoint, the HP S1922 employs energy-efficient LED backlighting, which not only enhances image quality but also helps reduce power consumption, making it an environmentally friendly option. The monitor's low power usage contributes to cost savings on electricity bills while also aiding in sustainability efforts.

Furthermore, the HP S1922 adheres to several certifications for energy efficiency and environmental standards, including ENERGY STAR and EPEAT Silver. These certifications assure users that the monitor has been designed with eco-friendly practices in mind.

In terms of ergonomics, the S1922 is crafted with a sturdy stand that provides stability while occupying minimal desk space. Its compact design means it can fit comfortably in smaller areas without sacrificing display quality.

To conclude, the HP S1922 is a practical choice for individuals seeking a reliable monitor that combines performance, efficiency, and an environmentally conscious approach. With its standout features and technologies, this monitor is well-suited for everyday tasks, making it a worthwhile investment for any user.
Top Page Image Contents