HP Q2210S, Q2010S, Q1910S manual Dvi

Icon	Main Menu Options	Sub-menu Options	Description
		OSD Timeout	Sets the time in seconds that the OSD is
			visible after the last button is pressed. The
			factory default is 30 seconds.
		Power Saver	Enables the power saving feature (see
			"Power-Saver Feature" in this chapter).
			Select:
			On
			Off
			The factory default is On.
		Power on Recall	Restores power to the monitor following
			an unexpected removal of power. Select:
			On
			Off
			The factory default is On.
		Mode Display	Displays the resolution, refresh rate, and
			frequency information on the screen each
			time the OSD Main Menu is accessed.
			Select:
			On
			Off
			The factory default is On or Off,
			depending on the model.
	Management		Selects the power-management features
			of the monitor.
		Source Control	Selects the video input signal. VGA is the
		(Select Models)	factory default.
		DVI	Selects DVI as the video input signal.
		VGA	Selects VGA as the video input signal.
		Default Source	Selects the default or primary video input
			signal when the monitor is connected to
			two active and valid video sources. The
			monitor will automatically determine the
			video format.
		Auto Switch Source	Turns the system's automatic video signal
			input to On or Off. The factory default is
			On.

20 Chapter 4 Operating the Monitor ENWW