HP LD4200, LD4700 manual Identifying Rear Components

Component		Function
11	Exit	Exits the menu.
12	Volume	Adjusts the sound up and down.
13	Set (Check)	Press to select a menu item or save changes.

Identifying Rear Components

Figure 3-15Rear Components (The product image in the user guide could be different from the actual image)

Component		Function
1	Power connector	Connects the AC power cord to the monitor
2	RS-232C serial ports	Connects to RS-232 devices
3	RGB PC, HDMI/DVI Ports	HDMI supports High Definition input and HDCP (High-bandwidth Digital Content
		Protection). Some devices require HDCP in order to display HD signals
4	PC Sound Jack	Connects the audio cable to the line-out jack of the PC sound card
5	Wired Remote Control Port	Connects a wired remote control to the monitor
6	AV Ports	Connects the video and audio equipment to the monitor
7	Speaker Ports	Connects the speakers to the monitor

NOTE: The line-out terminal is used to connect to the speaker, including a built-in amplifier (AMP). Be sure the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of the PC sound card has only Speaker Out, reduce the PC volume. If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to Line Out using the card jumper of the program. Refer to the manual that comes with the sound card for additional instructions.

12 Chapter 3 Setting Up the Monitor ENWW