HP LD4200, LD4700 manual Icon Main Menu Submenu Description

Icon	Main Menu	Submenu	Description
		Advanced	Selects the following screen color adjustment settings:
			● Gamma - set your own gamma value. On the monitor,
			high gamma values display whitish images and low
			gamma values display high contrast images.
			● Film Mode - function works in the following mode: AV,
			Component 480i. When you watch a movie, this function
			adjusts the set to the best picture appearance.
			● Black Level - function works in the following mode: AV
			(NTSC), HDMI/DVI adjusts the contrast and the
			brightness of the screen using the black level of the
			screen.
			● NR - removing the noise up to the point where it does not
			damage the original picture.
		Aspect Ratio	Selects the image size of the screen to:
			● 16:9 - widescreen mode.
			● Just Scan - allows you to enjoy the transmitted data fully
			without any images cut off. (This menu is activated only
			in 720p, 1080p and 1080i in Component mode.)
			● Original - the aspect ratio is not adjusted from the
			original. It is set by the program being watched.
			● 4:3 - the picture format is 4:3 aspect ratio.
			● 1:1 - the aspect ratio is not adjusted from the original.
			Used in PC mode. (Only HDMI/DVI PC, RGB PC)
			● 14:9 - programs are viewed normally in 14:9 with black
			bars added to the top and bottom. The 4:3 programs are
			magnified on the top/bottom and left/right sides.
			● Zoom1,2 - 4:3 programs are magnified until they fill the
			16:9 screen. The top and bottom will be cut off.
		Picture Reset	Returns the Picture Mode, Color Temperature, and Advance
			menu settings to the default factory settings.
		Screen	Adjusts the screen video to:
			● Auto config (RGB PC Input only): This button is for the
			automatic adjustment of the screen position, clock and
			phase. This function is available for analog signals only.
			● Manual Config: If the picture isn’t clear after auto
			adjustment and characters are still trembling, adjust the
			picture phase manually using the following functions:
			◦	Clock - minimizes any vertical bars or strips visible
				on the screen background. The horizontal screen
				size will also change. This function is available for
				analog signals only. The clock function is not
				available in Component, HDMI/DVI/AV.
			◦	Phase - adjusts the focus of the display. This item
				allows you to move any horizontal noise and clear
				or sharpen the image of characters. This function is
				available for analog signals only. The phase
				function is not available in Component, HDMI/DVI/
				AV.
			◦	H-Position - moves the screen position horizontally.

26 Chapter 4 Operating the Monitor ENWW