HP L2245WG manual Depending on monitor model, factory default is On or

Table 4-2OSD Menu (continued)

Icon	Main Menu	Submenu	Description
			Depending on monitor model, factory default is On or
			Off.
		Power-On Status	Displays the operating status of the monitor each time
		Display	the monitor is powered on. Select the location to
			display the status to:
			●	Top
			●	Middle
			●	Bottom
			●	Off
			The factory default is Top.
		DDC/CI Support	Allows the computer to control some OSD menu
			features such as brightness, contrast and color
			temperature. Set to:
			●	On
			●	Off
			The factory default is On.
		Bezel Power LED	Turns off the power LED on the front panel of the
			monitor. The factory default is On.
		Sleep Timer	Provides the timer adjustment menu options:
			● Set Current Time—sets the current time in hours
				and minutes
			● Set Sleep Time—sets the time you want to place
				the monitor in sleep mode
			● Set on Time—sets the time you want the monitor
				to wake up from sleep mode
			● Timer—sets the Sleep Timer feature On or Off.
				The default setting is Off.
			● Sleep Now—immediately sets the monitor to
				enter sleep mode
	Video Input		Selects the video input signal. DVI is the factory
	Control (select		default.
	models)
		Switch Video Input	Selects the other (VGA or DVI) video input signal.
			Default is DVI.
		Auto-Switch Input	Turns the system's automatic video signal input to on
			or off. The factory default is On.
		Default Video Input	Selects the default or primary video input signal when
			the monitor is connected to two active and valid video
			sources. The monitor will automatically determine the
			video format. The default input selection is DVI.

Analog — VGA — Selects VGA input.

28 Chapter 4 Operating the Monitor