At a Glance

QuickSpecs

HP ProLiant ML110 Generation 5 (G5)

Overview

Processor:

Quad-Core Intel® Xeon® processors 3300 sequence

Quad-Core Intel® Xeon® processors 3200 sequence

Dual-Core Intel® Xeon® processors 3100 sequence

Dual-Core Intel® Xeon® processors 3000 sequence

Dual-Core Intel® Core 2 processors 4000 sequence

Dual-Core Intel® Pentium® processors 2000 sequence

Single-Core Intel® Celeron® processors 400 Sequence

Memory:

512 MB Standard (1GB on SAS Models) / 8 GB Maximum of PC6400 DDR2, Unbuffered ECC

Storage Controller:

SATA Models: Integrated 6 ports SATA controller with embedded RAID (4 ports available for Hard Disks)

SAS Models: HP SC40Ge Host Bus Adapter with RAID 0, 1 support, FIO

Internal Drive Support:

4 HDD Support:

3.0TB SATA max storage (4 x 750GB HDD) 1.8TB SAS max storage (4 x 450GB HDD)

Network Controller:

Embedded NC105i PCI Express Gigabit Ethernet Server Adapter

Expansion Slots:

Slot 1: PCI 32-bit/33MHz at 3.3V

Slot 2: PCI-Express x8 connector with x1 link

Slot 3: PCI-Express x8 connector with x1 link

Slot 4: PCI-Express X8 connector with x8 link

USB Ports:

8 Total USB ports

2 Front

4 Rear

2 Internal (one for tape, one for standard USB device)

Management:

Standard Lights Out 100 IPMI 2.0 reporting

Optional HP ProLiant 100 G5 Lights Out 100c Remote Management Card

Standard HP ProLiant ML110 G5 Easy Set-up CD

Form Factor:

Micro ATX tower (4U)

Warranty:

This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair are available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. SATA hard drives have a one year warranty. SAS Enterprise drives have a three-year warranty.

NOTE: Server Warranty includes 1 year parts, 1 year labor, 1-year on-site support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

DA - 12867 North America — Version 14 — September 15, 2008

Page 2