QuickSpecs
HP ProLiant ML115
Technical Specifications
4 port Embedded SATA SATA Protocol | SATA 2, 3Gb/s | |
controller | SATA Ports | 4 internal |
| ||
| Port transfer rate | 1.5 Gb/s total |
| Maximum Capacity | up to 2 TB (4 x 500GB non hot plug SATA HDD) |
| RAID Levels Supported | RAID 1+0 (Striping & Mirroring) |
|
| RAID 1 (Mirroring) |
|
| RAID 0 (Striping) |
|
| RAID 5 (Striping with parity) |
| Logical RAID Volumes | NOTE: On SATA models with embedded RAID, setup instructions are |
| Supported | located in User Guide, CTO RAID is |
|
| Series Server User Guide: |
|
| http://h20000.www2.hp.com/bc/docs/support/SupportManual/ |
|
| c00368941/c00368941.pdf?jumpid=reg_R1002_USEN |
|
|
|
HP 8 Internal Port SAS Host Bus Adapter with
RAID
(SAS Model only)
Dimensions (excluding | 6.6 x 2.5 x 0.6 in (16.8 x 6.4 x 1.6 cm) |
bracket) |
|
Disk Drive and Enclosure | 3 Gbps SAS (Serial Attached SCSI) |
Protocol Support | 1.5 Gbps SATA (Serial Advanced Technology Attachment) |
Architecture | |
SAS Connectors | 2 internal SFF8484 x4 Wide SAS Connectors |
| 12 Gbps per x4 Wide SAS Port (4 x 3 Gbps) |
Data Transfer Method | |
PCI Bus Speed | |
PCI | |
Simultaneous Drive | 2 x4 Wide SAS Connectors |
Transfer Ports |
|
Port Transfer Rate | 12 Gb/s per x4 Wide SAS Port (4 x 3 Gb/s) |
Software upgradeable | Yes |
Firmware |
|
Maximum Capacity | 576GB (8 x 72GB) |
Memory Addressing | |
Logical Drives Supported | Up to 2 Logical Volumes |
| Up to 10 drives total in all RAID volumes |
| Up to 2 Drives per RAID 1 |
| Up to 8 Drives per RAID 0 |
RAID Support | RAID 1 (Mirroring) |
| RAID 0 (Striping) |
Upgradeable Firmware | |
Disk Drive and Enclosure | 3 Gbps SAS and 1.5 Gbps SATA |
Protocol Support |
|
NOTE: Slot 2 only supports standard PCI 32 bit
DA - 12704 Worldwide — Version 16 — May 12, 2008 | Page 25 |