QuickSpecs
HP ProLiant ML115
Configuration Information-Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Configuration
ModelsHP ProLiant ML115 NHP CTO Chassis (North America)439138-B21
Factory Integrated Models ship with:
Embedded NC320i PCI Express Gigabit Server Adapter
Keyboard and Mouse
370 Watts, PFC (Power Factor Correcting) Tower Form Factor (4U)
NOTE: HP SATA Drive Models are limited to <2TB support.
NOTE: On SATA models with embedded RAID, setup instructions are located in User Guide, CTO RAID is
Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)
Processors | AMD Athlon Processor Model 3500+ (2.2 GHz) Option Kit, FIO | |
| AMD Opteron™ Processor Model 1220SE (2.8 GHz) Option Kit, FIO | |
| AMD Opteron Processor Model 1216 (2.4 GHz) Option Kit, FIO | |
| AMD Opteron Processor Model 1214 (2.2 GHz) Option Kit, FIO | |
| AMD Opteron Processor Model 1210 (1.8 GHz) Option Kit, FIO | |
|
|
|
Memory | 2 GB Unbuffered | |
| 1 GB Unbuffered | |
| 512 MB Unbuffered | |
|
|
|
DA - 12704 Worldwide — Version 16 — May 12, 2008 | Page 9 |