HP ML310 manual Technical Specifications

QuickSpecs

HP ProLiant ML310 Generation 3

Technical Specifications

System Unit	Dimensions (HxWxD)	17.0 x 7-7/8 x 22 in (43.0 x 20.0 x 55.0 cm)
	Weight (approximate)	37 lb (16.8 kg)
	Input Requirements	Range Line Voltage	100-127V and 200-240V
	(per power supply)	Normal Line Voltage	115 to 230 VAC
	Line Frequency	50 to 60 Hz
	Rated Input Current	< 6A RMS at 90VAC with maximum load
	BTU Rating	1,560 BTU
	SCSI Connectors	One internal HD68 connectors
	(SCSI Models only)	NOTE: Support for either one internal or one external SCSI channel is
		available. To use the channel for external connection, order an internal-
		to-external SCSI cable option kit (PN 159547-B22 or 333370-B21).
	Power Supply Output	Rated Steady-State	350W
	Power	Power
		Maximum Peak Power	370W
	Temperature Range	Operating	50° to 93° F (10° to 35° C)
		Shipping	-40° to 150° F (-40° to 66° C)
	Relative Humidity	Operating	20% to 80%
	(non-condensing)	Non-operating	5% to 90%
	Acoustic Noise	Idle
		(Fixed Disk Drives
		Spinning)
		L WAd (BELS)	5.7
		L pAm (dBA)	40
		Operating
		(Random Seeks to Fixed
		Disks)
		L WAd (BELS)	5.7
		L pAm (dBA)	40
48X Max IDE (ATAPI)	Disk	Applicable Disk	CD-ROM, CD-XA, CD-DA (Mode 1, Mode 2,
CD-ROM Drive			Form 1 and 2)
			Photo CD (Single and Multi-session)
			Mixed Mode (Audio and Data combined)
			CD-R
		Capacity	540 MB (Mode 1, 12 cm)
			650 MB (Mode 2, 12 cm)
	Block Size	Mode 1	2,048 bytes
		Mode 2	2,340 bytes, 2,336 bytes
		CD-DA	2,352 bytes
		CD-XA	2,328 bytes
	Interface	IDE (ATAPI)
	Access Times (typical)	Random	<100 ms
		Full-Stroke	<150 ms
	Data Transfer Rate	Sustained	3000 to 7200 KB/s (20X to 48X)
		Burst	150 KBps to 7,200 KBps
		Bus Rate	16.7 MBps
	Cache Buffer	128 KB

DA - 12364 Worldwide QuickSpecs — Version 21 — 2-16-2007 Page 27