HP DL385 Configuration Information Factory Integrated Models, Factory Integrated Model ships with

Page 17

QuickSpecs

HP ProLiant DL385 Generation 6

Configuration Information - Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements.

NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis.

NOTE: FIO indicates that this option only available as a Factory Installable Option.

Step 1: Base Configuration (choose one of the following configurable models)

Models

HP ProLiant DL385G6 Rack CTO Chassis

572431-B21

 

Factory Integrated Model ships with:

 

 

(8) SFF Serial Attached SCSI (SAS) Drive Bays

 

 

Two HP NC382i Dual Port Multifunction Gigabit Server Adapters (four ports total)

 

 

PCI-Express Riser Cage

 

 

One IEC Power cord

 

 

Hot plug fans (fully redundant)

 

 

NOTE: 4 fans one processor models; 6 fans two processor models

 

 

Rack (2U), (3.5-inch)

 

 

NOTE: this option removes the optical media bay and 8 SFF drive bays

 

 

HP ProLiant DL385G6 Rack LFF CTO Chassis

573104-B21

 

Factory Integrated Model ships with:

 

(6) LFF Serial Attached SCSI (SAS) Drive Bays

NOTE: LFF configuration does not support internal optical drive

Two HP NC382i Dual Port Multifunction Gigabit Server Adapters (four ports total) PCI-Express Riser Cage

One IEC Power cord

Hot plug fans (fully redundant)

NOTE: (4 fans one processor models; 6 fans two processor models) Rack (2U), (3.5-inch)

Step 1A: Choose Storage Controller (must choose only one of the following)

Storage Controllers

NOTE: RAID 6 requires purchase of HP Smart Array Advanced Pack (516471-

 

 

B21).

 

 

HP Smart Array P800/512 BBWC Controller

381513-B21

 

NOTE: PCI Express.

 

 

HP Smart Array P212/256MB Controller

462834-B21

 

NOTE: PCI Express.

 

 

HP Smart Array P212/Zero Memory Controller

462828-B21

 

NOTE: PCI Express.

 

 

HP Smart Array P410/256MB Controller

462862-B21

 

NOTE: PCI Express.

 

 

HP Smart Array P410/512MB with BBWC

462864-B21

 

NOTE: PCI Express.

 

 

HP Smart Array P411/256MB Controller

462830-B21

 

NOTE: PCI Express.

 

 

HP Smart Array P411/512MB BBWC

462832-B21

 

NOTE: PCI Express.

 

 

 

 

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)

Processors

Six-Core Processors

DA - 13360 Worldwide QuickSpecs — Version 9 — 10.23.2009

Page 17

Image 17
Contents Processors OverviewFront View Rear View Deployment/Serviceability Power SupplyStorage Controller Network ControllerWarranty Standard Features PCI-X Interfaces StorageMaximum Internal HP Insight Software Graphics Integrated ATI ES1000, 32MB video standardCompliance Industry StandardIntelligent ManageabilitySecurity Trusted UPS and PDU PowerPlatform Module Cord MatrixSystem Fans Service and Support ConfiguratorTelco Rack Support Factory ExpressQuickSpecs HPC Interconnect InfiniBand HPC InterconnectsGigabit Ethernet Myrinet XPModels Base Models XX=AA PRC Country Code KeyModels Configuration Information Factory Integrated ModelsFactory Integrated Model ships with Storage Controllers512MB Bbwc FIOBase Memory HP DL385G6 O2435 HPM FIO Perf Pack Insight Control suitePerformance Packs Unique Options Core OptionsOptical Drives Hard DrivesSAS Hot Plug SFF Midline MDL Drives SAS Hot Plug 3.5 Enterprise ENT DrivesSAS Hot Plug 3.5 Midline MDL Drives Sata Hot Plug SFF Midline MDL DrivesRiser Cage Options Communications Gigabit Ethernet adaptersHP Insight Control suites Power SuppliesAdditional Options Drive Cage Options Optional UpgradesHP Smart Array P212 Controller HP Smart Array P411 ControllerSAS Rack-Mount Tape Solutions Tape Storage Tape Drives USB Rack-Mount Tape SolutionsHPC Specific Options HP StorageWorks 1/8 G2 Tape AutoloaderD2D Backup Disk-Based Backup RDX Removable Disk BackupHP StorageWorks MSL4048 Tape Library StorageWorks Options StorageWorks Fibre Channel HBAHP Rack and Rack Options Rack Options Console switches KVMHP StorageWorks Modular Smart Array Installation & Start-up Services Hardware Services 6-Hour Call to Repair On-site ServiceUSB Options DT528A#ABAMemory 112GB Empty 16GB OptionalMaximum8GB 128GBQuantity Position Supported Controller Removable Media StorageHP Smart Array P410/256 MB Controller 120GB 3.0G Sata SSD 60GB 3.0G Sata SSDTape Drives, External Maximum Storage Capacity with MSA70HP StorageWorks USB HP StorageWorks SASBackup Systems Removable Disk Backup System ExternalTape Automation External HP StorageWorks FibreVrms Frequency Range Power SpecificationsInput Voltage Range Supply Part Number AC Operational Input HP 1200W PowerVoltage Range Vrms Frequency Range HP 1200W PSU 48VDCQuickSpecs Power Specifications Power Supply Output Technical SpecificationsSystem Unit Input RequirementsSystem Inlet TemperatureRelative Humidity AltitudeSmart Array P410 Disk Drive Transfer rate SAS ConnectorsController Enclosure Interface Server InterfaceApproach Recycling Environment-friendly End-of-lifeProducts Management

DL385 specifications

The HP DL385 is a robust, versatile server designed primarily for virtualization, database processing, and intensive data applications. This server is well-regarded in environments requiring efficient power management, high performance, and excellent storage capabilities. The DL385 series leverages AMD EPYC processors which provide superior performance and more cores per socket compared to previous generations, thus enhancing multitasking and workload management.

One of the standout features of the HP DL385 is its ability to support large memory configurations. With support for up to 4TB of memory, the server is ideal for memory-intensive applications. Its 8 DIMM slots per CPU, paired with advanced memory technologies, ensure that data is processed quickly when demands peak.

The DL385 also offers outstanding storage options. It supports a variety of drive types, including SSDs and HDDs, and provides flexible RAID configurations for improved data protection and performance. The server can be configured with up to 30TB of storage capacity using dense, high-capacity drives, allowing organizations to handle large volumes of data without compromising access speed.

In terms of management and security, the server comes equipped with HPE's Integrated Lights-Out (iLO) technology, which provides advanced remote management capabilities. This allows IT administrators to monitor the health and performance of the server from anywhere, minimizing downtime and improving operational efficiency. The iLO also features enhanced security protocols to protect sensitive data against breaches and unauthorized access.

Power efficiency is another key characteristic of the HP DL385. It utilizes advanced power supply options and cooling technologies to reduce energy consumption, which translates to lower operational costs over time. This makes the DL385 an environmentally friendly choice for data centers looking to minimize their carbon footprint.

Scalability is crucial for many organizations, and the HP DL385 excels in this area. It can accommodate future upgrades in CPU, memory, and storage, making it a future-proof investment for businesses anticipating growth. Additionally, its compatibility with HPE's OneView management software provides a streamlined, intuitive approach to resource management.

In conclusion, the HP DL385 is a powerful server that combines high performance, advanced features, and robust security measures. Its ability to handle demanding workloads, coupled with its extensive management options and energy efficiency, makes it an excellent choice for organizations seeking reliability and scalability in their computing solutions.