HP DL385 Smart Array P410 Disk Drive, Controller Enclosure Interface, Server Interface, SAS Speed

Page 41

QuickSpecs

HP ProLiant DL385 Generation 6

Technical Specifications

 

 

NOTE: Product conformance to cited product specifications is based on

 

 

sample (type) testing, evaluation, or assessment. This product or family

 

 

of products is eligible to bear the appropriate compliance logos and

 

 

statements.

 

 

 

 

Smart Array P410

Disk Drive and

6Gb/s SAS (Serial Attached SCSI)

Controller

Enclosure Interface -

3Gb/s SATA (Serial ATA)

 

 

Transfer rate

 

 

 

 

 

SAS Connectors

2 internal (Mini-SAS) x8 wide port connectors

 

Cache Memory Speed DDR2-800MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s

 

 

maximum bandwidth.

 

 

Server Interface

x8 5G PCIe 2.0 provides 4GB/s maximum bandwidth

 

SAS Speed

x8 6G SAS provides 4.8GB/s maximum bandwidth

 

Cache Memory

40-bit 256MB ECC protected cache (72-bit 512MB BBWC module

 

 

upgrades available); transportable with battery-backed upgrade

 

Logical Drives

Up to 64 logical drives

 

 

Supported

 

 

 

Maximum Logical DriveGreater than 2TB

 

 

Capacity

 

 

 

Host Memory

64-bit, supporting greater than 4GB server memory space

 

Addressing

 

 

 

RAID Support

RAID 6, 6+0 (Advanced Data Guarding)

 

 

NOTE: The minimum of 256 MB cache, battery kit, and Smart Array

 

 

Advanced Pack License Key upgrade is required to enable RAID 6, 6+0

 

 

RAID 5, 5+0 (Distributed Data Guarding)

 

 

NOTE: The 256 MB is required to enable RAID 5, 5+0 support of the

 

 

Smart Array P410i

 

 

 

RAID 1+0 (Striping & Mirroring)

 

 

RAID 0 (Striping)

 

 

 

 

Two HP NC382i Dual

Network Interface

10Base-T/100Base-TX/1000Base-TX

Port Multifunction

Compatibility

IEEE 802.3 10Base-T

 

Gigabit Server

 

IEEE 802.3ab 1000Base-T

Adapters

 

 

IEEE 802.3u 100Base-TX

 

 

 

 

 

Data Transfer Method

PCI Express, four lanes (x4)

 

Network Transfer Rate

10Base-T (Half-Duplex)

10 Mb/s

 

 

10Base-T (Full-Duplex)

20 Mb/s

 

 

100Base-TX (Half-

100 Mb/s

 

 

Duplex)

 

 

 

100Base-TX (Full-

200 Mb/s

 

 

Duplex)

 

 

 

1000Base-TX (Half and

2000Mb/s

 

 

Full-Duplex)

 

 

Connector

Two RJ-45

 

 

Cable Support

10Base-T

Categories 3, 4 or 5 UTP;

 

 

 

up to 328 ft (100 m)

 

 

100Base-TX

Category 5 or higher UTP;

 

 

 

up to 328 ft (100 m)

 

 

1000BaseTX

Category 5 or higher UTP;

 

 

 

up to 328 ft (100 m)

DA - 13360 Worldwide QuickSpecs — Version 9 — 10.23.2009

Page 41

Image 41
Contents Processors OverviewFront View Rear View Deployment/Serviceability Power SupplyStorage Controller Network ControllerWarranty Standard Features PCI-X Interfaces StorageMaximum Internal HP Insight Software Graphics Integrated ATI ES1000, 32MB video standardCompliance Industry StandardIntelligent ManageabilitySecurity Trusted UPS and PDU PowerPlatform Module Cord MatrixSystem Fans Service and Support ConfiguratorTelco Rack Support Factory ExpressQuickSpecs HPC Interconnect InfiniBand HPC InterconnectsGigabit Ethernet Myrinet XPModels Base Models XX=AA PRC Country Code KeyModels Configuration Information Factory Integrated ModelsFactory Integrated Model ships with Storage Controllers512MB Bbwc FIOBase Memory HP DL385G6 O2435 HPM FIO Perf Pack Insight Control suitePerformance Packs Unique Options Core OptionsOptical Drives Hard DrivesSAS Hot Plug SFF Midline MDL Drives SAS Hot Plug 3.5 Enterprise ENT DrivesSAS Hot Plug 3.5 Midline MDL Drives Sata Hot Plug SFF Midline MDL DrivesRiser Cage Options Communications Gigabit Ethernet adaptersHP Insight Control suites Power SuppliesAdditional Options Drive Cage Options Optional UpgradesHP Smart Array P212 Controller HP Smart Array P411 ControllerSAS Rack-Mount Tape Solutions Tape Storage Tape Drives USB Rack-Mount Tape SolutionsHPC Specific Options HP StorageWorks 1/8 G2 Tape AutoloaderD2D Backup Disk-Based Backup RDX Removable Disk BackupHP StorageWorks MSL4048 Tape Library StorageWorks Options StorageWorks Fibre Channel HBAHP Rack and Rack Options Rack Options Console switches KVMHP StorageWorks Modular Smart Array Installation & Start-up Services Hardware Services 6-Hour Call to Repair On-site ServiceUSB Options DT528A#ABAMemory 112GB Empty 16GB OptionalMaximum8GB 128GBQuantity Position Supported Controller Removable Media StorageHP Smart Array P410/256 MB Controller 120GB 3.0G Sata SSD 60GB 3.0G Sata SSDTape Drives, External Maximum Storage Capacity with MSA70HP StorageWorks USB HP StorageWorks SASBackup Systems Removable Disk Backup System ExternalTape Automation External HP StorageWorks FibreVrms Frequency Range Power SpecificationsInput Voltage Range Supply Part Number AC Operational Input HP 1200W PowerVoltage Range Vrms Frequency Range HP 1200W PSU 48VDCQuickSpecs Power Specifications Power Supply Output Technical SpecificationsSystem Unit Input RequirementsSystem Inlet TemperatureRelative Humidity AltitudeSmart Array P410 Disk Drive Transfer rate SAS ConnectorsController Enclosure Interface Server InterfaceApproach Recycling Environment-friendly End-of-lifeProducts Management

DL385 specifications

The HP DL385 is a robust, versatile server designed primarily for virtualization, database processing, and intensive data applications. This server is well-regarded in environments requiring efficient power management, high performance, and excellent storage capabilities. The DL385 series leverages AMD EPYC processors which provide superior performance and more cores per socket compared to previous generations, thus enhancing multitasking and workload management.

One of the standout features of the HP DL385 is its ability to support large memory configurations. With support for up to 4TB of memory, the server is ideal for memory-intensive applications. Its 8 DIMM slots per CPU, paired with advanced memory technologies, ensure that data is processed quickly when demands peak.

The DL385 also offers outstanding storage options. It supports a variety of drive types, including SSDs and HDDs, and provides flexible RAID configurations for improved data protection and performance. The server can be configured with up to 30TB of storage capacity using dense, high-capacity drives, allowing organizations to handle large volumes of data without compromising access speed.

In terms of management and security, the server comes equipped with HPE's Integrated Lights-Out (iLO) technology, which provides advanced remote management capabilities. This allows IT administrators to monitor the health and performance of the server from anywhere, minimizing downtime and improving operational efficiency. The iLO also features enhanced security protocols to protect sensitive data against breaches and unauthorized access.

Power efficiency is another key characteristic of the HP DL385. It utilizes advanced power supply options and cooling technologies to reduce energy consumption, which translates to lower operational costs over time. This makes the DL385 an environmentally friendly choice for data centers looking to minimize their carbon footprint.

Scalability is crucial for many organizations, and the HP DL385 excels in this area. It can accommodate future upgrades in CPU, memory, and storage, making it a future-proof investment for businesses anticipating growth. Additionally, its compatibility with HPE's OneView management software provides a streamlined, intuitive approach to resource management.

In conclusion, the HP DL385 is a powerful server that combines high performance, advanced features, and robust security measures. Its ability to handle demanding workloads, coupled with its extensive management options and energy efficiency, makes it an excellent choice for organizations seeking reliability and scalability in their computing solutions.