HP DL385 manual Standard Features

Page 4

QuickSpecs

HP ProLiant DL385 Generation 6

Standard Features

NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section.

Processor

One of the following depending on Model

Six-Core Processors

AMD Opteron™ Processor Model 2435 (2.6 GHz, 6MB Level 3 Cache, 75W)

AMD Opteron™ Processor Model 2431 (2.4 GHz, 6MB Level 3 Cache, 75W)

AMD Opteron™ Processor Model 2427 (2.2 GHz, 6MB Level 3 Cache, 75W)

AMD Opteron™ Processor Model 2425HE (2.1 GHz, 6MB Level 3 Cache, 55W)

NOTE: Processor wattage references reflect Average CPU Power (ACP). For more information on

ACP visit: http://www.amd.com/powernow.

NOTE: Up to 2 processors supported. High Performance Model configurations include two processors, 16 GB system memory, 512MB storage controller memory, BBWC, DVDRW, Redundant 750W Power Supplies, and 6 hot plug redundant fans.

Cache Memory

6MB Level 3 cache memory

 

 

 

 

 

 

 

 

 

 

 

 

Upgradeability

Upgradeable to two processors

 

 

 

 

 

 

 

 

 

Chipset

Serverworks HT-2100 Northbridge and HT-1000 Southbridge Chipset

 

 

 

 

 

 

 

 

 

Memory Protection

Advanced ECC

 

 

 

 

 

 

 

 

 

 

Memory

Type

REG PC2-6400 DIMMs (DDR2-800)

 

 

One of the following

 

Standard models support 2:1 Bank Interleaving, with 4:1 Bank

 

depending on Model

 

Interleaving (Data saved across 2 pairs of DIMMs) and Node

 

 

 

interleaving support (data saved across 2 processors memory sets)

 

 

available.

 

 

 

 

 

 

NOTE: If only one processor is installed, only half of the DIMM slots are

 

 

available.

 

 

 

 

 

Standard

4 GB (2 x 2 GB)

 

 

 

 

 

(Entry Models)

 

 

 

 

 

 

Standard

8 GB (2 x 4 GB)

 

 

 

 

 

(Base Models)

 

 

 

 

 

 

Standard

16 GB (4 x 4 GB)

 

 

 

 

 

(Performance Models)

 

 

 

 

 

 

Maximum

128 GB (16 x 8 GB) (PC2-5300)

 

 

 

 

 

Network Controller

Two HP NC382i Dual Port Multifunction Gigabit Server Adapters (four ports total)

 

 

NOTE: 1GB of memory is sufficient to support up to eight Total Ports. 2GB of memory is required

 

if nine or more Total Ports have been selected.

 

 

 

 

 

 

 

 

 

 

 

Expansion Slots

 

 

 

 

 

 

 

Primary Riser

Expansion

Technology

Bus

Connector

Bus Number Form Factor

Notes

(Standard)

Slots #

 

Width

Width

 

 

 

 

1

PCI-Express

x8

x16

42

Full

 

 

 

 

 

 

 

Length/Full

 

 

 

 

 

 

 

Height

 

DA - 13360 Worldwide QuickSpecs — Version 9 — 10.23.2009

Page 4

Image 4
Contents Front View Rear View OverviewProcessors Power Supply Deployment/ServiceabilityStorage Controller Network ControllerWarranty Standard Features PCI-X Maximum Internal StorageInterfaces Graphics Integrated ATI ES1000, 32MB video standard HP Insight SoftwareIndustry Standard ComplianceIntelligent ManageabilityUPS and PDU Power Security TrustedPlatform Module Cord MatrixSystem Fans Configurator Service and SupportTelco Rack Support Factory ExpressQuickSpecs HPC Interconnects HPC Interconnect InfiniBandGigabit Ethernet Myrinet XPModels Base Models Country Code Key XX=AA PRCConfiguration Information Factory Integrated Models ModelsFactory Integrated Model ships with Storage ControllersBase Memory FIO512MB Bbwc Performance Packs Insight Control suiteHP DL385G6 O2435 HPM FIO Perf Pack Core Options Unique OptionsOptical Drives Hard DrivesSAS Hot Plug 3.5 Enterprise ENT Drives SAS Hot Plug SFF Midline MDL DrivesSAS Hot Plug 3.5 Midline MDL Drives Sata Hot Plug SFF Midline MDL DrivesCommunications Gigabit Ethernet adapters Riser Cage OptionsAdditional Options Power SuppliesHP Insight Control suites Optional Upgrades Drive Cage OptionsHP Smart Array P212 Controller HP Smart Array P411 ControllerTape Storage Tape Drives USB Rack-Mount Tape Solutions SAS Rack-Mount Tape SolutionsHPC Specific Options HP StorageWorks 1/8 G2 Tape AutoloaderDisk-Based Backup RDX Removable Disk Backup D2D BackupHP StorageWorks MSL4048 Tape Library StorageWorks Options StorageWorks Fibre Channel HBAHP StorageWorks Modular Smart Array Rack Options Console switches KVMHP Rack and Rack Options Hardware Services 6-Hour Call to Repair On-site Service Installation & Start-up ServicesUSB Options DT528A#ABAMemory Empty 16GB Optional 112GBMaximum8GB 128GBStorage Quantity Position Supported Controller Removable MediaHP Smart Array P410/256 MB Controller 60GB 3.0G Sata SSD 120GB 3.0G Sata SSDMaximum Storage Capacity with MSA70 Tape Drives, ExternalHP StorageWorks USB HP StorageWorks SASRemovable Disk Backup System External Backup SystemsTape Automation External HP StorageWorks FibreInput Voltage Range Power SpecificationsVrms Frequency Range HP 1200W Power Supply Part Number AC Operational InputVoltage Range Vrms Frequency Range HP 1200W PSU 48VDCQuickSpecs Technical Specifications Power Specifications Power Supply OutputSystem Unit Input RequirementsTemperature System InletRelative Humidity AltitudeTransfer rate SAS Connectors Smart Array P410 Disk DriveController Enclosure Interface Server InterfaceProducts Management Environment-friendly End-of-lifeApproach Recycling

DL385 specifications

The HP DL385 is a robust, versatile server designed primarily for virtualization, database processing, and intensive data applications. This server is well-regarded in environments requiring efficient power management, high performance, and excellent storage capabilities. The DL385 series leverages AMD EPYC processors which provide superior performance and more cores per socket compared to previous generations, thus enhancing multitasking and workload management.

One of the standout features of the HP DL385 is its ability to support large memory configurations. With support for up to 4TB of memory, the server is ideal for memory-intensive applications. Its 8 DIMM slots per CPU, paired with advanced memory technologies, ensure that data is processed quickly when demands peak.

The DL385 also offers outstanding storage options. It supports a variety of drive types, including SSDs and HDDs, and provides flexible RAID configurations for improved data protection and performance. The server can be configured with up to 30TB of storage capacity using dense, high-capacity drives, allowing organizations to handle large volumes of data without compromising access speed.

In terms of management and security, the server comes equipped with HPE's Integrated Lights-Out (iLO) technology, which provides advanced remote management capabilities. This allows IT administrators to monitor the health and performance of the server from anywhere, minimizing downtime and improving operational efficiency. The iLO also features enhanced security protocols to protect sensitive data against breaches and unauthorized access.

Power efficiency is another key characteristic of the HP DL385. It utilizes advanced power supply options and cooling technologies to reduce energy consumption, which translates to lower operational costs over time. This makes the DL385 an environmentally friendly choice for data centers looking to minimize their carbon footprint.

Scalability is crucial for many organizations, and the HP DL385 excels in this area. It can accommodate future upgrades in CPU, memory, and storage, making it a future-proof investment for businesses anticipating growth. Additionally, its compatibility with HPE's OneView management software provides a streamlined, intuitive approach to resource management.

In conclusion, the HP DL385 is a powerful server that combines high performance, advanced features, and robust security measures. Its ability to handle demanding workloads, coupled with its extensive management options and energy efficiency, makes it an excellent choice for organizations seeking reliability and scalability in their computing solutions.