sym53c8xx This is a SCSI chipset driver for the LSI Logic family of HBAs (amongst others).
aic7xxx This is a SCSI chipset driver for the Adaptec 7xxx chipset family (such as Adaptec 29160LP).
Latest SCSI controller drivers for Linux will be available from the manufacturer’s web site.
In order to communicate with a tape device, the operating system needs to have drivers for the tape and the underlying transport mechanism (the host bus adaptor) loaded. Ensure that both are available as either loadable modules (for example, usable with insmod and visible with lsmod) or are statically built into your kernel.
NOTE: In order to add drivers to the statically built kernel you need the Linux source code available on disk and knowledge of how to use the kernel building tools that ship with various Linux distributions. This should not be attempted by novice users.
In order to determine if the drive has been detected by the tape driver at module load time, execute:
dmesg grep "st"
This should find a number of lines. One should look like:
Detected SCSI tape st0 at scsi1, channel 0, id 5, lun 0
To load the tape driver module if it is not loaded as above, execute:
insmod st
to load it. This should happen naturally if your system is rebooted after attaching the drive.
When the ST driver module has been added, a list of tape device files will be created automatically. They reside in the /dev/ directory and have the syntax:
/dev/stp or dev/nstp
where:
pis the instance number of the device file. (If only one drive is connected to the system, this will be 0.)
nindicates that this is a
In order to enable large transfers under Linux (>64 KB per write), edit the file /usr/src/linux/drivers/scsi/st_options.h and change the definition of
ST_BUFFER_BLOCKS.
24 Linux