HP w8000 manual Using SCSISelect with Scsi Devices

Page 71

Hard Drive Installation

Using SCSISelect with SCSI Devices

The SCSI host adapter includes the SCSISelect utility to configure the host adapter and to run SCSI disk utilities. To run the SCSISelect utility:

■In POST Messages Enabled mode: Press Ctrl + A when the

Press <Ctrl><A> for SCSISelect Utility message displays during POST.

■In POST Messages Disabled mode: When the Compaq logo screen displays, press any key to exit the logo screen. Immediately after exiting the logo screen, press Ctrl + A to access the SCSISelect utility.

A menu displays with the following options:

■Configure/View Host Adapter Settings

❏SCSI Bus Interface Definitions

◆Host Adapter SCSI ID

◆SCSI Parity Checking

◆Host Adapter SCSI Termination

❏Additional Options

◆Boot Device Options

◆SCSI Device Configuration

◆Advanced Configuration Options

■SCSI Disk Utilities

❏Lists all SCSI devices and SCSI ID numbers

For additional information about configuring POST message display status, refer to the Computer Setup Guide on the Reference Library CD.

Compaq Evo Workstation W8000 Hardware Reference Guide

B-7

Image 71

Contents Hardware Reference Guide Rack Stability Contents Electrostatic Discharge Specifications Hard Drive InstallationBattery Replacement Security Lock ProvisionsRoutine Computer Care and Shipping Preparation Standard Configuration Features Product FeaturesFront panel components Front Panel ComponentsRear panel components Rear Panel ComponentsSystem board components System Board ComponentsProduct Features Audio System Keyboard Easy Access KeyboardLocking and Unlocking the Easy Access Buttons Easy Access SoftwareReprogramming the Easy Access Buttons Windows Logo Key Easy Access Paper Icon InsertSerial Number Location Special Mouse FunctionsInstallation Sequence Hardware UpgradesHardware Upgrades Removing the Workstation Access Panel Removing the Front Bezel Installing Additional Memory Location of Rimm sockets Memory Expansion BoardRemoving the Memory Expansion Board Removing the torx screw on the back of the metal slot cover Hardware Upgrades Rimm Installation Guidelines Rimm InstallationHardware Upgrades Configuration 2 Two Pairs of RIMMs Configurations for Rimm InstallationConfiguration 3 Three Pairs of RIMMs Installing RIMMsHardware Upgrades Installing a Rimm and a Crimm Reinstalling the Memory Expansion Board Installing a memory expansion board Securing the memory expansion board Drive Bay Components Installing Additional DrivesDrive Bay Components Removing the Bezel Blank Preparing for Drive InstallationRemoving the Removable Hard Drive Cage Removing and Replacing the Removable Hard Drive CageRemoving the Cooling Shield Replacing the Removable Hard Drive CageRemoving a cooling shield Locating the Hardware Screws Installing a hard Drive in Bays 5 Installing a DriveInstalling a hard drive in the hard drive adapter Hardware Upgrades Connecting the Uata signal cable and power cable Hardware Upgrades Locating the hard drive screw holes Hardware Upgrades Connecting the Scsi signal cables and power cables Identifying the PCI and AGP Sockets Installing and Removing an Expansion BoardInstalling an Expansion Board Installing an expansion board Removing an Expansion Board Installing an Additional ProcessorRemoving the air baffle Installing a second processor Installing a second VRM board and clip Reinstalling the air baffle Hardware Upgrades Hardware Components Required Preparing for a Processor UpgradeUpgrading a Processor Heatsink Cool-Down Time Guidelines for Separating the Heatsink/Processor AssemblyHeatsink Warm-Up Time Removing an Existing ProcessorEnsure that the heatsink is warm to the touch Twisting and lifting the heatsink off the processor Disabling Onboard Devices Installing a New ProcessorEvo Workstation W8000 SpecificationsUsing the Cable-Select Feature with Ultra ATA Devices Hard Drive InstallationUATA-100 cable Guidelines for Installing Ultra ATA DevicesScsi Devices Guidelines for Using Scsi DevicesHard Drive Installation Scsi Cables Guidelines for Installing Scsi DevicesScsi Controllers Using a Scsi Cable Using SCSISelect with Scsi Devices Replacing the Battery Battery ReplacementLift the battery out of its holder Battery Replacement Security Lock Provisions Installing a Cable LockSecurity Lock Provisions Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Routine Computer Care Routine Computer Care Shipping PreparationOperation CD-ROM Drive PrecautionsCleaning SafetyShipping Preparation Cooling shield IndexFunctions Windows Logo Key