York DJ 180 warranty Minimum Clearances, Unit Dimensions DJ180, 210, 240 & 300 Rainhood

Page 32

TABLE 26: MINIMUM CLEARANCES

LOCATION

CLEARANCE

Front

36”

Rear

24” (Less Economizer)

49” (With Economizer)

 

 

 

Left Side (Filter Access)

24” (Less Economizer)

36” (With Economizer)3

Right Side (Cond. Coil)

36”

Below Unit1

0”

Above Unit2

72” With 36” Maximum

Horizontal Overhang (For

 

Condenser Air Discharge)

1.Units may be installed on combustible floors made from wood or class A, B, or C roof covering material.

2.Units must be installed outdoors. Overhanging structures or shrubs should not obstruct condenser air discharge outlet.

3.If economizer is factory installed, the unassembled rain hood must be removed from its ride along position in front of evapora- tor coil, or in the outdoor air compartment, prior to final installa- tion.

261660-YTG-C-0707

NOTE: ELEC / ELEC Models: Units and ductwork are approved for zero clearance to combustible material when equipped with electric heaters.

GAS / ELEC Models: A 1” clearance must be provided between any combustible material and the supply air ductwork for a distance of 3 feet from the unit.

The products of combustion must not be allowed to accumulate within a confined space and recirculate.

Locate unit so that the vent air outlet hood is at least:

Three (3) feet above any force air inlet located within 10 horizontal feet (excluding those integral to the unit).

Four (4) feet below, four horizontal feet from, or one foot above any door or gravity air inlet into the building.

Four (4) feet from electric and gas meters, regulators and relief equipment.

 

 

ECONOMIZER

 

 

 

 

MOTORIZED

 

 

SUPPLY AIR

POWER EXHAUST

DAMPER

 

 

RAIN HOOD

RAIN HOOD

 

 

COMPARTMENT

ECONOMIZER / MOTORIZED DAMPER

 

(on Return Air Compartment)

(on Outdoor Air Compartment)

 

 

 

 

AND POWER EXHAUST RAIN HOODS

 

 

 

 

 

 

 

 

FIXED

 

 

 

 

OUTDOOR AIR

 

 

 

 

INTAKE HOOD

 

 

 

 

(located on

 

 

 

 

Return Air

 

 

 

36-5/8”

Compartment)

 

 

 

 

 

 

 

 

 

1“ CONDENSATE

 

 

 

16-1/8”

DRAIN

 

 

 

 

(Must be trapped)

 

 

5”

 

 

 

 

 

28-3/16”

92”

 

REAR VIEW

 

 

LH VIEW

DETAIL “Y”

UNIT WITH RAIN HOODS

FIGURE 6 - UNIT DIMENSIONS DJ180, 210, 240 & 300 (RAINHOOD)

32

Unitary Products Group

Image 32
Contents Technical Guide DescriptionTable of Contents Product Nomenclature Ton Magnum Model Number NomenclatureFeatures FACTORY-INSTALLED Options Unit CutawayUnitary Products Group FIELD-INSTALLED Accessories Unitary Products Group GAS Heat Ratiings Sound Power RATING1Capacity Ratings ARI Cooling Capacities for DJ180 MBHCooling Capacities for DJ210 6500Cooling Capacities for DJ240 8000Cooling Capacities for DJ300 Altitude Correction Factors AIR Temp Altitude FeetALTITUDE/TEMPERATURE Conversion Factor Volt and Standard Drive Volt Standard Drive 6000 7000 8000 9000 9400 965 980 1025 1065 1125 1170 870 900 930 950 980 995 1015 6000 7000 8000 9000 9400 7500 8750 10000 11250 12500 Static RESISTANCES1 Power Exhaust PerformanceBlower Motor and Drive Data DJ Electrical Data Without Powered Convenience Outlet Size240 DJ Electrical Data with Powered Convenience Outlet None 120.4 150 E18 13.5 37.5 DJ Voltage LIMITATIONS1 Physical DataSupply FAN VFD WEIGHTS, in LBS Electric Heat Correction FactorsFront View Dimensions Utilities Entry Data Rear View Dimensions Unit Dimensions DJ180, 210, 240 & 300 Rainhood Minimum ClearancesUnit Center of Gravity Four and SIX Point Loads Unit Roof Curb Dimensions DimensionOCC Guide Specifications GeneralOutdoor Condenser FAN Assembly Electric Heating DJ***C/E Models Other Factory Installed Options

DJ 180 specifications

York DJ 180 is a cutting-edge DJ controller that has made a significant impact on the electronic music scene, particularly among novice and professional DJs alike. Designed to offer a seamless mixing experience, it combines innovative technology and user-friendly features, making it a go-to choice for anyone looking to elevate their DJ skills.

One of the standout features of the York DJ 180 is its intuitive layout, which includes two robust jog wheels that offer excellent precision and responsiveness. These jog wheels are not only sensitive to touch but also offer adjustable resistance, allowing DJs to customize their setup according to their mixing style. The controller's large play/pause and cue buttons are positioned strategically for quick access, ensuring smooth transitions between tracks.

The DJ 180 also boasts a comprehensive array of controls, including eight backlit performance pads per deck. These pads allow users to trigger samples, loops, and effects effortlessly, enabling enhanced creativity on the fly. Additionally, the controller features dedicated EQ knobs and a built-in sound card, which allows for easy connection to external devices and enhanced audio quality.

Incorporating advanced technology, the York DJ 180 supports both USB and MIDI connections, ensuring compatibility with a wide range of software and hardware setups. Whether mixing with popular DJ software or using it as a standalone controller for live performances, this flexibility makes it an essential tool for any DJ.

Another notable characteristic of the York DJ 180 is its portability. Weighing in at just under six pounds and featuring a slim profile, it is designed for DJs on the move, making it easy to transport to gigs and events without compromising on functionality.

Furthermore, the controller includes built-in effects, such as delay, reverb, and flanger, allowing DJs to add unique touches to their sets without needing external equipment. This streamlined approach makes the York DJ 180 not just a controller but a complete performance solution.

In conclusion, the York DJ 180 is a technologically advanced DJ controller that balances portability and performance with user-friendly features. Whether you are just starting your DJ journey or are an experienced professional, the versatility and quality of the York DJ 180 make it an excellent choice for all music enthusiasts.