HP w22, w20 manual Setting the Optimal Resolution, Adjusting the Volume, Click Settings

Page 12

Settings

Back to Contents Page

Settings

Setting the Optimal Resolution • Adjusting the Volume • Locking and Unlocking the OSD • Adjusting OSD Settings

Setting the Optimal Resolution

The recommended resolution for this monitor is 1680 x 1050. To configure the monitor to this resolution, complete the setup procedure and make sure that the monitor is connected to the computer. Turn the monitor on and do the following:

1Click Start.

2Click Settings.

3Click Control Panel.

4Double-click Display.

5Click Settings.

6Set the resolution slide bar to 1680 x 1050.

NOTE: If 1680 x 1050 is not shown, download the monitor driver from the Web. See Using the Monitor for instructions.

Adjusting the Volume

While the monitor is turned on but the OSD menu is inactive, press the volume increase and decrease (Plus and Minus) buttons to adjust volume to the desired level. Volume can range from 0 (mute) to 100. The preset value is 50.

Locking and Unlocking the OSD

To change the lock status of the on-screen display (from locked to unlocked, or from unlocked to locked) press and hold the menu button for 10 seconds while the monitor is on. If the OSD is locked, the message “OSD Lock” displays for 10 seconds.

12

Image 12

Contents Preface Safety and Maintenance Guidelines Setup Using the Monitor Installing Drivers and Using the Auto-Adjustment FeatureTechnical Support FAQs Specifications HP w20 / w22 LCD Monitor User’s GuideBack to Contents Page Safety and Maintenance Guidelines Setup Using the MonitorPreface About This GuideSafety and Maintenance Guidelines Important Safety InformationSafety Precautions Maintenance Guidelines Cleaning the MonitorSetup Attaching the Base Removing the Base Adjusting the TiltBase and Tilt Attaching the BaseAdjusting the Tilt Removing the BaseCables Attaching the CablesAttaching the Cables 6 Turn on your monitor and computer Preparing to Install a Wall Mounting Arm Not supplied Installing a Wall Mounting ArmWall Mounting Arm Using the Monitor Operating InstructionsExternal Controls Settings Setting the Optimal ResolutionAdjusting the Volume 2 Click Settings 3 Click Control PanelAdjusting On-Screen Display Settings Factory Preset OSD MenuOSD Menu Levels LevelOSD Menu Levels continued Installing Drivers and Using the Auto-Adjustment Feature Using the Auto-Adjustment FunctionDownloading Drivers and Software 3 Select Download Drivers and SoftwareTechnical Support FAQs Technical Support FAQs Frequently Asked QuestionsProblem & Question Possible SolutionsProblem & Question Specifications HP w20HP w22 Preset Display Modes PresetPixel Format HorizontalPower Cord Set Requirements Pin Assignmentsthe Signal Cable Pin NumberPlug and Play DDC2B Feature LCD Monitor Quality and Pixel Policy Agency Regulatory Notices Federal Communications Commission NoticeModifications CablesFor questions regarding your product, contact Hewlett-Packard Company Canadian Notice Avis CanadienEuropean Union Regulatory Notice Japanese Notice Japanese Power Cord Notice Japanese Material Content Declaration Korean Notice Materials DisposalHP Recycling Program EPA Energy Star ComplianceCongratulations ErgonomicsEnergy EmissionsEcology