HP C-200 manual Setting the AEB, Setting the AF Area, To set AEB, To set AF Area

The table below shows the available Drive mode settings.

Icon	Item	Description
	10 Sec Self-timer	Sets a 10-second delay to capture image after pressing the Shutter button.
	2 Sec Self-timer	Sets a 2-second delay to capture image after pressing the Shutter button.
		Performs delay and capture twice:
	Double Self-timer	• Performs a 10-second delay, then captures the image.
		• Performs another 2-second delay then captures the image again.
		Performs continuous shooting when the Shutter button is pressed.
	Burst
		Stops shooting when the shutter button is released.
	Speedy Burst	Captures 30 images in a shot when the Shutter button is pressed.
		Auto set Image size to VGA only.

Off

Captures an image without time delay.

Setting the AEB

AEB stands for Automatic Exposure Bracketing. It takes 3 consecutive photos in the order of standard exposure, under exposure and overexposure compensation.

To set AEB

1.From the Record menu, select AEB.

2.Use the or keys to go through the selection.

3.Press the OK button to save and apply changes.

Setting the AF Area

AF stands for Automatic Focus. This feature determines the area on which the camera focuses.

To set AF Area

1.From the Record menu, select AF Area.

2.Use the or keys to go through the selection.

3.Press the OK button to save and apply changes.

41