HP ACC2 Aurora manual Acquire-expose-1000 acquire-focus

Page 31

31

acquire->expose->1000 acquire->focus

Now the camera continuously catches images. The Image_1 window is acting like a video camera screen. It is now easiest to see the instantaneously effect of focusing each lens. Perhaps it is easiest to start with the bottom lens and then afterwards the adjust the middle lens.

The continuously exposure is stopped with the <ESC> button or the right mouse button.

Then remember to shut down the camera again with:

user->shutterctrl->0 user->initgain->0 user->initpower->0 user->comclose

Image 31
Contents ACC2 Jan 15 UpdatesTable of Content Precautions Starting the Camera Now if the run file, the timer file and the sequence fileACC window Press OpenCom Image. Is useful settingsThis settings To disk.ACC window Press the Stop button and the Exit button Stopping the CameraGarmin Overview of the ACC ProgramVia VisualBasicACC2-- PMISmacros-- SMARTMTRNorway.prg RUN filename Timer fileACC2 Control Files Run fileSequence file Yyyy-mm-dd hhmmss$$ f$ e$$$ g$ s$ u$ c$ Or the Garmin Exposure timeIntensifier gain Run fileSequence file will not work S0 u1As this example Image File Names Page Denotes Wavelength W557.7nm Image FormatD1997-12-07145129W557.7nmF2G0E230 Upper case letters a Z are used as identifiers Denotes dateCopying Images to a Network Disk Settings in the configuration file see below must then bePage # #### ##### # ## # # # # # # Configuration FileAccnetimageallow Imagenorth Saving Data AT DAT Storage Media This backup last for approximate 1 hour / GBThis is for the Unis/UiO camera no 1 Longyearbyen Afdisk Saving Data AT Pinnacle Apex 2 X 2GB Optical DiskTools-Format Tape ,… Colorado Backup window press on the C in the leftUse ν Verify backup This is for the Unis/UiO camera no 2 Ny ÅlesundPage Connector for 12VC from the AC Automatic Update of PC ClockTxD, RxD GND connector White GPS 12XL Camera SetupPage Focusing Acquire-expose-1000 acquire-focus Possible Errors