HP 463777-001 manual Dimensions Logical geometry, Interface type, Total logical sections, Maximum

Specifications

This table provides physical and performance specifications for the hard drive.

Dimensions		Logical geometry
Height	25.4 mm	Cylinders	16,383
Width	89 mm	Heads	16
Weight	499 g	Sectors	63
Interface type	AT 16 bit	Total logical sections	2,001,382
Data transfer rate		Disk rotational speed	7200 rpm
Disk to buffer	45 Mbytes/sec
Interface with or with IORDY	16.6 Mbytes/sec
Seek times (typical read, including setting)		Average latency	5.5 ms
Single track	3 ms	Spin-up time (maximum)	7.0 s
Average	13 ms
Maximum	24 ms
Physical geometry		Spin-down time	100 S
Cylinders	158,518	(maximum)
Heads	4
Sectors	ID 528-710
	OD 998-1216
Operating temperature		5°C to 55°C (41°F to 131°F)

✎Certain restrictions and exclusions apply. Consult Help and Support for details.

*Total storage capacity is 300 billion bytes (for hard drives, 1GB = 1 billion bytes); actual accessible capacity is less. Actual drive specifications may differ slightly.

5–2 Maintenance and Service Guide