HP 3070 B611 manual USB Connection non-network connection, Connect a new printer

Page 36

Connectivity

Chapter 8

￿A wireless 802.11b/g/n network that includes a wireless router or access point. NOTE: 802.11n will only support 2.4Ghz

￿A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer must be connected to the wireless network that you intend to install the HP All-in-One on.

￿Network name (SSID).

￿WEP key or WPA Passphrase (if needed).

To connect the product

1.Insert the product Software CD in the computer CD-ROM drive.

2.Follow the instructions on the screen.

When you are prompted, connect the product to the computer using the USB setup cable included in the box. Follow the onscreen prompts to enter your wireless network settings. The product will attempt to connect to the network. If the connection fails, follow the prompts to correct the problem, and then try again.

3.When the setup is finished, you will be prompted to disconnect the USB cable and test the wireless network connection. Once the product connects successfully to the network, install the software on each computer that will use the product over the network.

USB Connection (non-network connection)

The HP All-in-One supports a rear USB 2.0 High Speed port for connection to a computer.

NOTE: Web services will not be available with a USB direct connection.

To connect the product with the USB cable

▲Refer to the setup instructions that came with your product for information on connecting to a computer with a USB cable.

NOTE: Do not connect the USB cable to the product until you are prompted to do so.

If the printer software has been installed, the printer will operate as a plug and play device. If the software has not been installed, insert the CD that came with the device and follow the onscreen instructions.

Change from a USB connection to a wireless network

If you first setup your printer and installed the software with a USB cable, directly connecting the printer to your computer, you can easily change to a wireless network connection. You will need a wireless 802.11b/g/n network that includes a wireless router or access point.

NOTE: 802.11n will only support 2.4Ghz

Change from a USB connection to a wireless network

1.From the computer’s start menu select All Programs or Programs, and then select HP.

2.Select HP Deskjet 3070 B611 All-in-One series

3.Select Printer Setup and Software Selection.

4.Select Convert a USB connected printer to wireless. Follow the onscreen instructions.

Connect a new printer

Connect a new printer

1.From the computer’s start menu select All Programs or Programs, and then select HP.

2.Select HP Deskjet 3070 B611 All-in-One series

34 Connectivity

Page 35 Page 37
Image 36
Page 35 Page 37
Contents HP Deskjet 3070 B611 All-in-One series Page Contents Index How Do I? How Do Get to know the HP All-in-One Printer partsControl panel features Wireless SettingsControl panel features From the Wireless Menu, select Settings Status LightsAuto Power-Off On Button LightPrint Print photosTo print a photo on photo paper Print documents Print Quick FormsTo print from a software application Print envelopes Tips for print successPrint Quick Forms To print envelopesPrinter settings tips Paper loading tipsB611 series HP Deskjet 3070 B611 series Print using the maximum dpi To print in Maximum dpi modeMedia drop-down list, click Photo Paper, Best Quality Print EPrint from anywhere EPrint from anywhereTo ePrint a document from anywhere EPrint from anywhere Paper basics Recommended papers for printingLoad media Load small-size paper Load envelopes Paper basics Paper basics Copy and scan CopyEasy Copy More copy features Scan to a computerPrepare the scan Scan from the printer control panel Scan from your computerTips for copy success Tips for scan successTips for scan success Copy and scan Work with cartridges Check the estimated ink levelsOrder ink supplies To check the ink levels from the control panelChoose the right cartridges Replace the cartridgesLocate the cartridge number in the Printer Software Related topicsInsert new cartridge Remove cartridge from packaging Cartridge warranty information WiFi Protected Setup WPS requires WPS router Traditional wireless connection requires routerWireless Settings Menu method ConnectivityChange from a USB connection to a wireless network USB Connection non-network connectionConnect a new printer Change network settings Tips for setting up and using a networked printerChange network settings Advanced printer management tools for networked printersConnectivity Solve a problem To print a diagnosticsImprove print quality To align the cartridges from the Printer SoftwareTo clean the cartridges automatically Open cartridge access door to locate the jamClear a paper jam Resolve print issues Unable to printPrevent paper jams To verify that the product is set as the default printer Click Manage, and then click Services and ApplicationsTo verify that the product is not paused or offline To restart the print spoolerClear the print carriage Prepare paper trayPrepare printer To clear the print queueInk cartridge problem Printer failurePrinthead failure Setup Cartridges Cartridge Supply Upgrade Older Generation CartridgeIf you have a problem, follow these steps NetworkingHP support Additional warranty options Technical information Cartridge chip informationSpecifications Print specifications Copy specificationsScan specifications Print resolution Draft modeEnvironmental product stewardship program Power consumption Sleep modeTechnical information Regulatory notices Chemical SubstancesTechnical information Products with wireless LAN devices FranceTechnical information Index Index
Top Page Image Contents