HP S LP1965, S LP2465, S LP2065 manual Turning on the Monitor

4.Pivot the monitor from landscape to portrait orientation viewing to adapt to your application.

Figure 3-11Pivoting the Monitor

NOTE The 20" model (shown above) pivots counter-clockwise; the 19" and 24" models pivot clockwise.

To view information on the screen in portrait mode, you will need to install the Pivot Pro software included on the software and documentation CD.

Turning on the Monitor

1.Press the power switch to turn on the computer.

2.Press the master power switch on the rear of the monitor.

3.Press the power button on the front of the monitor.

CAUTION Burn-in image damage may occur on monitors that display the same static image on screen for a prolonged period of time.* To avoid burn-in image damage on the monitor screen, you should always activate a screen saver application or turn off the monitor when it is not in use for a prolonged period of time. Image retention is a condition that may occur on all LCD screens.

* A prolonged period of time is 12 consecutive hours of non-use.

12 Chapter 3 Setting Up the Monitor ENWW