QuickSpecs
HP StorageWorks 2000sa Modular Smart Array
Technical Specifications
MSA2000sa | POWER REQUIREMENTS |
|
| Input Power Requirements | |
| Max Input Power | 475W maximum continuous |
| Heat Dissipation | 1622 BTU/hour |
| TEMPERATURE AND HUMIDITY RANGES | |
| Operating Temperature | 41° F to 104° F (5°C to 40°C) |
| Shipping Temperature | |
|
| 3000 meters |
| Operating Humidity | 10% to 90% RH @ 104° F (40° C), |
| Up to 93% RH @ 104° F (40° C), | |
| DECLARED ACOUSTIC NOISE LEVELS | |
| Sound Power | <6.03B Sound Power |
| Sound Pressure | <55dBA Sound Pressure |
| SHOCK AND VIBRATION |
|
| Shock, Operational | 5.0G, 10ms, half sine |
| Shock, | 15G 11ms, half sine |
| Vibration, Operational | 0.21Grms Random 5Hz to 500Hz flat spectrum/feed forward |
| Vibration, Non- | 0.5G 1 octave/minute 5Hz to 500Hz to 5 Hz sine sweep |
| Operational | 0.5Grms Random 20Hz |
|
| |
| PHYSICAL |
|
| Height | 3.5 in (8.9 cm) |
| Depth (excluding cables) | 23.7 ins (60.2 cm) |
| Width | 17.6 in (44.7 cm) |
| Chassis Weight | 44 lbs (19.96 kg) |
|
|
|
MSA2000sa Controller | Host Interface | 2 x4 lane SAS ports - 3Gb/s per lane |
| Protocol Support | SAS |
| RAID Support | 0, 1, 3, 5, 6, 10, 50 |
| Cache Memory | 1GB Read/Write. |
| Cache Backup | ECC protection with back up to flash memory ( indefinite backup) |
| Upgradeable Firmware | - yes - partner firmware update (PFU) |
| Disk Drive and Enclosure | 3Gb SAS - Serial Attached SCSI / 3 Gb SATA=II |
| Protocol Support |
|
| Expansion Port | One 4X SAS connector (SFF8470) Expand up to 3 more drive enclosures |
DA - 13045 Worldwide — Version 1 — July 14, 2008 | Page 20 |