HP DL380 Generation 7 (G7) Dimm Slots 9 per CPU node, Standard memory configuration 1 CPU model

QuickSpecs

HP ProLiant DL380 Generation 7 (G7)

Memory

1 DIMM Per Channel	1333	1333	1333	1066	1333	1333	1066	1066	1066	1333	1333	1333
2 DIMM Per Channel	1066/	1333	1333	1066	1066/	1066/	800	800	800	1333	1333	1333
	1333*				1333*	1333*
3 DIMM Per Channel	800**	800**	800	800	800**	800**	n/a	n/a	n/a	n/a	n/a	n/a

*2DPC: LV runs default 1333 at 1.5V. Use RBSU Power Management option to select 1066 at 1.35V. Std runs at 1333.

**3DPC: LV/Std voltage runs at 800

NOTES:

Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities

If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if the slower DIMM is on the other processor

If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, you still run at 1066MHz

If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other channels, you run at 1066MHz

If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz

References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.

DIMM slot and configuration diagrams

Basic memory slot & population diagram

Population order; start with "A" first, "B" second, "C" third, etc.

18 DIMM SLOTS (9 per CPU node)

		CPU1			CPU2
	slot #		population order	slot #		population order
Chnl 1	1		G	1		G	Chnl 1
	2		D	2		D
	3		A	3		A
Chnl 2	4		H	4		H	Chnl 2
	5		E	5		E
	6		B	6		B
Chnl 3	7		I	7		I	Chnl 3
	8		F	8		F
	9		C	9		C

Standard memory configuration (1 CPU model)

6GB, consisting of three (3) 2GB dual-rank PC3-10600 RDIMMs

DA - 13595 Worldwide — Version 65 — March 25, 2013 Page 41