HP Thunderbolt 2-Port AiO Module ESXi/ESX manual Fio-status, Fio-pci-check options

fio-pci-check [options]

Options	Description
-d <value>	1 = Disable the link; 0 = bring the link up (HP does not
	recommend this parameter)
-f	Scan every device in the system.
-i	Print the device serial number. This option is invalid when
	the VSL is loaded.
-r	Force the link to retrain.
-v	Verbose: Print extra data about the hardware.

fio-status

Description

The fio-statuscommand provides detailed information about the specified or all installed IO Accelerators. This utility operates on /dev/fctx devices. The fio-statuscommand must run with root privileges and requires that the driver be loaded. If no driver is loaded, a smaller set of status information is returned.

The fio-statuscommand provides alerts for certain error modes, such as a minimal-mode, read-only mode, and write-reduced mode, describing what is causing the condition.

Syntax

fio-status <device> [options]

where <device> is the name of the device node (/dev/fctx), where x indicates the card number: 0, 1, 2, and so on. For example, /dev/fct0 indicates the first IO Accelerator installed on the system.

If <device> is not specified, the fio-statuscommand displays information for all IO Accelerator devices in the system. If the driver is not loaded, this parameter is ignored.

Options

Option	Description
-a	Reports all available information for each device.
-e	Shows all errors and warnings for each device. This option is for diagnosing issues, and it
	hides other information such as format sizes.
-c	Count: Reports only the number of IO Accelerator devices installed.
-d	Shows basic information set plus the total amount of data read and written (lifetime data
	volumes). This option is not necessary when the -aoption is used.
-fj	Format JSON: Creates the output in JSON format.
-fx	Format XML: Creates the output in XML format.
-u	Shows unavailable fields. Only valid with -fjor -fx.
-U	Shows unavailable fields and details why the fields are unavailable. Only valid with -fjor
	-fx.
-F<field>	Prints the value for a single field (see the -loption for field names). Requires that a device be
	specified. Multiple -Foptions can be specified.
-l	Lists the fields that can be individually accessed with -F.

Utilities 34