CONGRATULATIONS!
You've purchased one of America's Finest Wood Burning Heaters. By heating with wood and coal, you're helpingCONSERVE AMERICA'S
ENERGY!
Wood is our Renewable Energy Resource. Please do your part to preserve our wood supply. Plant at least one tree each year. Future generations will thank you.
NOTE: YOUR UNIT MUST BE INSTALLED BY A QUALIFIED FURNACE INSTALLER. IMPROPER INSTALLATION COULD VOID YOUR WARRANTY!
NOTE: (See Page 5, First Paragraph)
Tools And Materials Needed
TOOLS | MATERIALS |
Pencil | 6" Pipe, 6" Elbow, Collar and Thimble |
6 Foot Folding Rule or Tape | as required (24 gauge min.) |
Tin Snips | 1/2" Sheet Metal Screws |
Drill, (Hand or Electric) | 6" Inside diameter Listed Residential Type |
Drill bit, - 1/8" dia. | or Building Heating Appliance Chimney |
(For Sheet Metal Screws) | or existing masonry chimney (See Page 8) |
Screw Driver | Electrical Wiring |
Gloves | 6" Draft Regulator |
Sabre Saw | 1/2" Conduit (Conduit Connectors) |
5/16" Nut Driver or | Furnace Cement |
5/16" Socket w/Ratchet | Manufacturer Recommends: |
Safety Glasses | Rutland |
| Plenum and Duct work as required. |
2