HP C4485, C4472, C4480, C4435 Scan an image, To print one or more small-size photos, Press Settings

Page 10

Chapter 1

2

Memory Stick, Memory Stick Pro, Memory Stick Select, Memory Stick Magic Gate, Memory Stick Duo or Duo Pro (adapter optional), or Memory Stick Micro (adapter required)

HP All -in

-One overview

To print one or more small-size photos

1.Load 10 x 15 cm (4 x 6 inch) photo paper in the input tray.

2.Insert your memory card into the appropriate slot on the product.

3.Press the buttons next to the up arrow or down arrow icons on the display to scroll through the photos on your memory card until the photo you want to print appears.

4.Press Settings.

5.Leave the default Size setting as Borderless.

6.Press the button next to Prints/Total to increase the number of copies you want to print of the current image.

The first number on the display indicates how many copies of the current image will be printed. The second number indicates how many total prints are in the print queue.

7.Press OK.

TIP: You can repeat steps 3 through 8 to add photos to the print queue.

8.Press the button next to Print on the display.

TIP: While the photo is printing, you can continue scrolling through the photos on your memory card. When you see a photo you want to print, you can press the Print button to add that photo to the print queue.

Scan an image

You can start a scan from your computer or from the control panel of the HP All-in-One. This section explains how to scan from the control panel of the HP All-in-One only.

NOTE: You can also use the software you installed with the HP All-in-One to scan images. Using this software, you can edit a scanned image and create special projects using a scanned image.

To scan to a computer

1.Load your original print side down on the right front corner of the glass.

NOTE: Ensure that there are no memory cards inserted in the memory card slots on the product.

2.Press the button next to Scan/Reprint. The Scan/Reprint menu appears.

3.Press the button next to Scan to PC.

A preview image of the scan appears on your computer, where you can edit it. Any edits that you make apply to the current scan session only.

The HP Photosmart Software has many tools that you can use to edit your scanned image. You can improve the overall image quality by adjusting the brightness, sharpness, color tone, and saturation. You can also crop, straighten, rotate, or resize the image.

4.Make any edits to the preview image, and then click Accept when you are finished.

8 HP All-in-One overview

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Basics Guide Hewlett-Packard Company notices Contents HP All-in-One at a glance HP All-in-One overviewOne overview Control panel buttons HP All-in-One overviewLoad originals and load paper Find more informationTo load an original on the glass To load full-size paper To load small-size photo paper in the input tray Avoid paper jams Print 10 x 15 cm 4 x 6 inch photosTo print one or more small-size photos Press SettingsScan an image To scan to a computerReplace the print cartridges Make a copyTo replace the print cartridges One overview HP All-in-One overview To clean the glass Clean the HP All-in-OneTo clean the lid backing Clean the HP All-in-One Troubleshooting and support Troubleshooting and supportUninstall and reinstall the software Troubleshooting common setup issuesHardware setup troubleshooting SolutionAfter setting up the product, it does not print Clear paper jamsSupport process Print cartridge troubleshootingIf you have a problem, follow these steps To clear a paper jam from the rear doorSystem requirements Product specificationsTechnical information Regulatory noticesWarranty HP product Duration of limited warrantyTechnical information
Related manuals
Manual 243 pages 17.98 Kb
Top Page Image Contents