HP C4485 Technical information, System requirements, Product specifications, Regulatory notices

Technical information

The technical specifications and international regulatory information for the HP All-in-One are provided in this section.

For additional regulatory and environmental information, including the Declaration of Conformity statement, see the onscreen Help.

System requirements

Software system requirements are located in the Readme file.

Product specifications

For product specifications, go to the HP Web site at www.hp.com/support.

Paper specifications

•Input tray capacity: Plain paper sheets: Up to 100 (75 gsm. (20 lb.) paper)

•Output tray capacity: Plain paper sheets: Up to 50 (75 gsm. (20 lb.) paper)

NOTE: For a complete list of supported media sizes, see the printer software.

Physical specifications

•Height: 16.7 cm (6.6 inches)

•Width: 43.4 cm (17.1 inches)

•Depth: 56.7 cm (22.3 inches) with tray extender open; 40.3 cm (15.9 inches) with tray extender closed

•Weight: 5.0 kg (11.0 pounds)

Power specifications

•Power consumption: 20 watts maximum (average printing)

•Input voltage(0957-2231): AC 100 to 240 V ~ 600 mA 50–60 Hz

•Output voltage: DC 32 V===375 mA, 16 V===500 mA

NOTE: Use only with the power adapter supplied by HP.

Environmental specifications

•Recommended operating temperature range: 15 ºC to 32 ºC (59 ºF to 90 ºF)

•Allowable operating temperature range: 5 ºC to 35 ºC (41 ºF to 95 ºF)

•Humidity: 15% to 80% RH non-condensing

•Non-operating (Storage) temperature range: –20 ºC to 50 ºC (–4 ºF to 122 ºF)

•In the presence of high electromagnetic fields, it is possible the output from the HP All-in-One may be slightly distorted

•HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize injected noise due to potential high electromagnetic fields

Regulatory notices

The HP All-in-One meets product requirements from regulatory agencies in your country/region. For a complete listing of regulatory notices, see the onscreen Help.

Regulatory model identification number

For regulatory identification purposes, your product is assigned a Regulatory Model Number. The Regulatory Model Number for your product is SNPRB-0721. This regulatory number should not be confused with the marketing name (HP Photosmart C4400 All-in-One series, etc.) or product numbers (CC200A, etc.).

18 Technical information