HP C4500 manual What you need for an integrated wireless Wlan 802.11 network

Page 5

The advantages of a wireless infrastructure network as compared to an ad hoc network include:

•Advanced network security

•Enhanced reliability

•Network flexibility

•Better performance

•Shared Broadband Internet access

To set up the HP All-in-One on an integrated wireless WLAN 802.11 network, you need to do the following:

First, collect all of the required materials.

Next, install the software and connect the HP All-in-One to the wireless router.

See this section:

“What you need for an integrated wireless WLAN 802.11 network” on page 3

“Connect to an integrated wireless WLAN

802.11network” on page 3

What you need for an integrated wireless WLAN 802.11 network

To connect the HP All-in-One to an integrated wireless WLAN 802.11 network, you will need the following:

❑A wireless 802.11 network that includes a wireless router or access point.

❑A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer must be connected to the wireless network that you intend to install the HP All-in-One on.

❑Broadband Internet access (recommended) such as cable or DSL.

If you connect the HP All-in-One on a wireless network that has Internet access, HP recommends that you use a wireless router (access point or base station) that uses Dynamic Host Configuration Protocol (DHCP).

❑Network name (SSID).

❑WEP key or WPA Passphrase (if needed).

❑A USB setup cable to connect temporarily for transferring wireless settings.

Connect to an integrated wireless WLAN 802.11 network

The HP Photosmart Software CD and included USB setup cable provide an easy way to connect the HP All-in-One to your wireless network.

CAUTION: To prevent other users from accessing your wireless network, HP strongly recommends using a password or passphrase (WPA or WEP security) and a unique network name (SSID) for your wireless router. Your wireless router might have been shipped with a default network name, which is typically the manufacturer name. If you use the default network name, your network can be easily accessed by other users using the same default network name (SSID). It also means that the HP All-in-One might accidently connect to a different wireless network in your area which uses the same network name. If this happens you will not be able to access the HP All-in-One. For more information on how to change the network name, see the documentation that came with your wireless router.

Network setup

Set up the HP All-in-One on an integrated wireless (WLAN 802.11) network

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Basics Guide Hewlett-Packard Company notices Contents If you want to Network setupConnect to an integrated wireless Wlan 802.11 network What you need for an integrated wireless Wlan 802.11 networkTo connect the product Wireless ad hoc network setupWhat you need for an ad hoc network Create a network profile for other operating systems Connect to a wireless ad hoc networkCommunication mode Ad Hoc Encryption enabled Connect to additional computers on a network Configure your firewall to work with HP products Print network settings Manage your network settingsRestore network defaults Advanced firewall informationPrint the wireless network test Turn the wireless radio on and offHP All-in-One at a glance HP All-in-One overviewLabel Icon Name and Description Control panel featuresLoad paper Find more informationStart Here guide Onscreen HelpTo load small-size photo paper in the input tray To load full-size paperPrint a photo on photo paper Avoid paper jamsTo scan to a computer Scan an imageTo print photos To replace the print cartridges Replace the print cartridgesHP All-in-One overview HP All-in-One overview Uninstall and reinstall the software Troubleshooting and supportTroubleshooting common setup issues To uninstall and reinstall the softwareSetup troubleshooting Solution 1 Press the On button to turn on the product After setting up the product, it does not printSolution 2 Set your product as the default printer Solution 5 Load paper in the input trayThis prints the Wireless Network Test Network troubleshootingTo run the Network Diagnostic tool To check a wired Ethernet connectionTo print the Network Configuration To check a wireless connectionThis prints the Network Configuration Make sure the product is on the networkTo access the HP Photosmart C4500 All-in-One series home Make sure the HP Network Devices Support service is runningTo restart the HP Network Device Support service Make sure the product is online and readyIf you have a problem, follow these steps Print cartridge troubleshootingClear paper jams Support processTechnical information Product specificationsSystem requirements Regulatory noticesHP product Duration of limited warranty WarrantyXHPERXUJ UDQDLV
Top Page Image Contents