TOOLS AND MATERIALS NEEDED
TOOLS | materials |
HERE
WARRANTY INFORMATION CARD
•Pencil
•Measuring Tape or 6 foot rule
•Tin Snips
•Drill and 1/8” dia. bit
•Gloves
•Screwdriver (Blade type)
•5/16” Nut Driver or 5/16” Socket w/Ratchet
•Chimney Connection- 6” Diameter Black Steel pipe (24 gauge minimum) and elbow(s) either adjustable1 or corrugated as necessary
•1/2” Sheet Metal Screws
•6” Inside Diameter Underwriters Laboratories (UL) listed Residential Type and Building Heating Appliance Chimney, Type “HT”, or 6” existing Masonry Chimney with flue liner.
•Floor Protector Material: 3’ x
•Furnace Cement (Manufacturer recommends: Rutland Code 78 or Equivalent)
1Avoid adjustable elbows, they leak!
" CUT
Name___________________________________________________ Telephone #: (_____)____________
City_________________________________________________State__________Zip___________________
Email Address____________________________________________________________________________
Model # of Unit________________________________ Serial #___________________________________
Fuel Type: qWood qCoal
Place of Purchase (Retailer)______________________________________________________________
| circulator dimensions |
| |
| 32 1/4 | 19 1/4 | 4 1/4 |
12 1/2 | CENTER LINE OF 6" |
| CENTER LINE |
| CHIMNEY CONNECTOR |
| |
|
| OF 6" | |
|
|
| |
|
|
| CHIMNEY |
|
|
| CONNECTOR |
| 33 1/2 |
|
|
|
|
| 24 |
4 1/8
TOP OF FLOOR PROTECTOR
Rules for safe installation and operation
Save These Instructions! Read these rules and the instructions carefully.
City_________________________________________________State__________Zip___________________
If internet purchase, please list website address____________________________________________
Date of Purchase________________________________________________________________________
I have read the owner’s manual that accompanies this unit and fully understand the:
Installation q | Operation q | and Maintenance q of my new appliance. |
Print Name |
| Signature |
| Date |
Please attach a copy of your purchase receipt.
Warranty not valid without a Proof of Purchase.
1.Check local codes. The installation must comply with their rulings. Do not install this heater in a mobile home or trailer.
2.Always connect this heater to a chimney or vent to the outside. Never vent to another room or inside a building.
3.Do not connect this heater to an aluminum Type B gas vent. This is not safe and is pro- hibited by all codes. This heater requires connection to approved chimneys: Either a chimney complying with the requirements for Type HT chimneys in the Standard for Chimneys. Factory Built, Residential Type and Building Heating Appliance, UL 103, or a code approved masonry chimney with a flue liner, preferably round. A larger masonry flue may be used, so long as the
4.The chimney portion (whether
5.Be sure that your Chimney is safely con- structed and in good repair. Have the chimney inspected by the Fire Department or a qualified inspector (such as a Chimney sweep). Your insurance company may be able to recommend a qualified inspector.
6.Inspect chimney connector and chimney twice monthly during the heating season for any deposit of creosote or soot which must be removed.
7.Provide air for combustion from outside the house into the room where the heater is lo- cated. If the intake is not in the same room, air must have free access to the room.
" CUT HERE
Warranty information must be received within 30 days of original purchase.
Detach this page from this manual, fold in half with this page to the inside and tape together. Apply a stamp and mail to the address provided. You may use an envelope if you choose.
You may register online by going to www.usstove.com
All information submitted will be kept strictly confidential. Information provided will not be sold for advertising purposes. Contact information will be used solely for the purpose of product notifications.
2