CHIMNEY
Parts List
Your wood stove may be hooked up with a 6” factory built or masonry chimney. If you are using a factory built chimney, it must comply with UL 103 standard; therefore it must be a Type HT (2100°F). It is extremely important that it be installed according to the manufacturer’s specifications.
If you are using a masonry chimney, it is important that it be built in compliance with the specifications of the National Building Code. It must be lined with fire clay bricks, metal or clay tiles sealed together with fire cement. (Round flues are the most efficient).
The interior diameter of the chimney flue must be identical to the stove smoke ex- haust. A flue which is too small may cause draft problems, while a large flue favours rapid cooling of the gas, and hence the
DO NOT CONNECT THIS UNIT TO A CHIMNEY
FLUE SERVING ANOTHER APPLIANCE.
The following recommendations may be useful for the installation of your chimney:
1.It must rise above the roof at least 3’ (0.9m) from the uppermost point of contact.
2.The chimney must exceed any part of the building or other obstruction within a 10’ (3.04m) distance by a height of 2’ (0.6m).
3.Installation of an interior chimney is always preferable to an exterior chim- ney. Indeed, the interior chimney will, by definition, be hotter than an exterior chimney, being heated up by the am- bient air in the house. Therefore the gas which circulates will cool more slowly, thus reducing the
4.The draft caused by the tendency for hot air to rise will be increased with an interior chimney.
5.Using a fire screen at the extremity of the chimney requires regular inspection in order to insure that it is not obstructed thus blocking the draft, and it should be cleaned when used regularly.
Key | Part No. | Description | Qty. |
|
|
|
|
1 | 67859 | Weldment, Base | 1 |
2 | 22030 | Shield, Second Heat (Included w/ 67859) | 1 |
3 | 22110 | Shield, Heat (Included w/ 67859) | 1 |
4 | 68619 | Assy., Heat Jacket | 1 |
5 | 88032 | Gasket, Flue Collar | 1 |
6 | 40246 | Collar, Flue | 1 |
7 | 22090 | Curtain, Smoke | 1 |
8 | 22171 | Clip, Smoke Curtain | 2 |
9 | 40075 | Frame, Draft Damper | 1 |
10 | 67132 | Damper, Draft Control | 1 |
11 | 25550 | Pin, Draft Damper | 1 |
12 | 83890 | Clip, Push | 1 |
13 | 40100 | Liner, Front/Back | 3 |
14 | 22536 | Support, Grate | 2 |
15 | 40102 | Grate, Frame | 1 |
16 | 40101 | Grate, Coal | 1 |
17 | 40045 | Shaker | 1 |
18 | 40132 | Retainer, Brick | 2 |
19 | 89066 | Firebrick (4.5” x 9” x 1.25”) | 10 |
20 | 891940 | Assy., Feed Door (Complete) | 1 |
- | 40199 | Feed Door - Casting Only | - |
21 | 88033 | Rope Gasket, 3/8” | 3.75 ft. |
22 | 891941 | Assy., Ash Door (Complete) | 1 |
- | 40289 | Ash Door - Casting Only | - |
23 | 88033 | Rope Gasket, 3/8” | 2.42 ft. |
24 | 83872 | Pin, Door - Short | 1 |
25 | 23441 | Pin, Door - Long | 1 |
26 | 83102 | Bolt, | 2 |
27 | 40056 | Wheel, Draft | 2 |
28 | 83415 | Nut, | 2 |
6 |
29 | 25201 | Shield, Flame | 2 |
30 | 83250 | Kep Nut, | 4 |
31 | 40509 | Handle, Door | 2 |
32 | 89523 | Handle, Drop Wood | 1 |
33 | 22434 | Latch, Door | 1 |
34 | 83045 | Washer, Flat | 2 |
35 | 83273 | Washer, Spacer | 1 |
36 | 22108 | Latch, Door (Door Stop) | 1 |
37 | 23474 | Liner, Top | 1 |
38 | 67444 | Ash Pan | 1 |
19