HP 2710xi manual Congratulations, Set up additional computers optional

Page 14

17 Congratulations

HP Photosmart 2600/2700 series all-in-one

User Guide

When you see the Congratulations! screen, you are ready to use your HP all-in-one. See the User Guide or onscreen help to get started.

If you have additional computers on your network, go to the next step.

Tips:

If you are not using

 

a wireless network

 

and want to turn

 

off the blue light,

 

press Setup, 8, 5,

 

and then 2.

To prevent paper from flying out of the output tray, pull, and then flip the paper tray extender out.

18 Set up additional computers (optional)

If you have additional computers on your network, then install the

HP all-in-one software on each computer.

Follow the onscreen instructions. Make sure that you choose the connection type between the network and your HP all-in-one (not between your computer and the network).

14 • HP all-in-one

Page 13 Page 15
Image 14
Page 13 Page 15
Contents
Start Here Remove all tape Locate componentsLoad plain white paper Attach the control-panel overlay if not attachedLift the color graphics display Connect the power cord and adapter Connect the supplied phone cordRemove tape from both cartridges Open access doorPress the On button Insert the tri-color print cartridge Insert the black print cartridgeAlign the print cartridges Turn on your computerChoose ONE connection type a or B or C USB ConnectionA1 Insert the correct CD Windows Users Macintosh UsersA2 Connect the USB cable A3 Go to onConnect the Ethernet cable B2 Choose the correct CD B3 Go to onC1 Write down the required information C2 Enter information on control panelC3 Choose the correct CD Set up additional computers optional CongratulationsTroubleshooting Q3452-90203
Related manuals
Manual 4 pages 35.15 Kb Manual 241 pages 30.18 Kb Manual 16 pages 45.99 Kb Manual 49 pages 35.85 Kb Manual 62 pages 34.34 Kb