HP 2710xi manual A2 Connect the USB cable, A3 Go to on

Page 9

A2 Connect the USB cable

Windows Users:

a You may have to wait several minutes before you see the onscreen prompt to connect the USB cable. Once the prompt appears, connect the USB cable to the port on the back of the HP all-in-one, and then to any USB port on your computer.

If you do not see this screen, see

Troubleshooting in the last section.

Macintosh Users:

a Connect the USB cable from your computer to the USB port on the back of the device.

bDouble-click the HP All-in-One installer icon.

cMake sure you complete all screens, including the Setup Assistant. You must select USB. Also, you must click the Print Center button to add the HP all-in-one to your printer list.

b Follow the onscreen instructions to complete the Fax Setup Wizard and Sign up now screens.

A3 Go to step 17 on page 14.

9 • HP all-in-one

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Remove all tape Locate components Start HereAttach the control-panel overlay if not attached Lift the color graphics displayLoad plain white paper Connect the supplied phone cord Connect the power cord and adapterOpen access door Press the On buttonRemove tape from both cartridges Insert the black print cartridge Insert the tri-color print cartridgeTurn on your computer Align the print cartridgesUSB Connection Choose ONE connection type a or B or CWindows Users Macintosh Users A1 Insert the correct CDA3 Go to on A2 Connect the USB cableConnect the Ethernet cable B3 Go to on B2 Choose the correct CDC2 Enter information on control panel C1 Write down the required informationC3 Choose the correct CD Congratulations Set up additional computers optionalTroubleshooting Q3452-90203
Related manuals
Manual 4 pages 35.15 Kb Manual 241 pages 30.18 Kb Manual 49 pages 35.85 Kb Manual 62 pages 34.34 Kb
Top Page Image Contents