HP 2710xi manual Press the On button, Open access door, Remove tape from both cartridges

Page 4

9 Press the On button

On

a After you press the On button, the green light flashes, and then becomes solid. This may take up to a minute.

b Wait for the print cartridge prompt before continuing.

10 Open access door

a Lift the access door.

b Press down and lift up

the green and black latches on the inside of the HP all-in-one.

11 Remove tape from both cartridges

Pull the pink tab to remove the tape from both print cartridges.

Do not touch the copper- colored contacts or retape the cartridges.

4 • HP all-in-one

Image 4 Contents
Start Here Remove all tape Locate componentsLift the color graphics display Attach the control-panel overlay if not attachedLoad plain white paper Connect the power cord and adapter Connect the supplied phone cordPress the On button Open access doorRemove tape from both cartridges Insert the tri-color print cartridge Insert the black print cartridgeAlign the print cartridges Turn on your computerChoose ONE connection type a or B or C USB ConnectionA1 Insert the correct CD Windows Users Macintosh UsersA2 Connect the USB cable A3 Go to onConnect the Ethernet cable B2 Choose the correct CD B3 Go to onC1 Write down the required information C2 Enter information on control panelC3 Choose the correct CD Set up additional computers optional CongratulationsTroubleshooting Q3452-90203
Related manuals
Manual 4 pages 35.15 Kb Manual 241 pages 30.18 Kb Manual 16 pages 45.99 Kb Manual 49 pages 35.85 Kb Manual 62 pages 34.34 Kb