United States Stove VFZC32L, VFZC32N GAS Pressure Check, Flex Pipe Connected to control

Page 15

GAS CONNECTION, CONTINUED...

The gas inlet connection is 3/8" NPT, made at the rear of the main control. This unit comes with an 18" gas flex pipe attached to the control valve at the factory. Run gas line into firebox from either side and attach to gas flex pipe.

Test all gas joints from the gas meter to the heater for leaks using soap and water solution after completing connection. DO NOT USE AN OPEN FLAME.

Note: Gas Flex pipe can be ran to either side of the fireplace for ease of gas connection.

Gas Flex Pipe

FIGURE 9. Flex Pipe Connected to control

 

GAS PRESSURE CHECK

The heater regulator controls the burner pressure which should be checked at the pressure test point located on the right side of the main control and is accessible from the side of the gas log assembly (see FIGURE 10).

The pressure should be checked with the heater burning and the control set to high (HI).

The pressure regulator is preset and locked to avoid tampering. If the pressure is not as specified in Product Specifications (Page 2), contact your dealer and replace the regulator.

Test Pressure Input

Control Bracket (Rightside view facing heater)

Test Pressure

Output

Control Valve

FIGURE 10 - Pressure Test Point Location

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Do not try to light any appliance Owners Operation and Installation ManualDo not use a blower insert Heat exchanger insert or other ~WHAT to do if YOU Smell GASLocal Codes Table of ContentsPage VFZC32 Specifications Firebox TOP View Firebox Front View Firebox Side View Product Features Locating FireplaceAIR for Combustion and Ventilation Providing adequate ventilation Unusually Tight ConstructionConfined Space and Unconfined Space Determining if You Have a Confined or Unconfined Space Ventilation Air From Inside Building Ventilation AIRMinimum Wall and Ceiling Clearances see Figure InstallationInstallation Clearances Mantel Clearances for Conventional InstallationMinimum Clearance to Wall and Ceiling Mantel Clearances for Built-in InstallationInstalling the Fireplace Hood Installing the Fireplace ScreenInstalling the Firebrick Panels into the firebox Gas Connection GAS ConnectionFlex Pipe Connected to control GAS Pressure CheckFireplace Installation Using Optional Mantel Mantel InstallationInstalling Firebox on Hearth Base VFZC32 BUILT-IN InstallationBuilt-in Fireplace Installation Height Front Width Depth Model #Rough Opening for Installing in Corner LOG Assembly Proper Installation SequenceLOG Positioning What to do if YOU Smell GAS For Your Safety Read Before LightingFor Your Safety Operating InstructionsTurn OFF GAS to Appliance Lighting InstructionsPilot Flame Cleaning / ServicingMatch Lighting Instructions Checking Flame AppearanceFlames Periodic CleaningAnnual Cleaning/Inspection Flame AppearanceKEY Description PART# QTY Parts Diagram and Parts ListGenerator Assembly Parts Diagram KEY Description QTY Generator Assembly Parts ListInstalling the Optional VF32B Blower Kit VF32B Blower KIT, Wiring DiagramFace Mantel Optional AccessoriesCabinet Mantel Hearth BaseAluminum Trim Kits Blower AccessoryWall Switch Accessory Remote Control AccessoryHOW to Order Repair Parts Ussc

VFZC32L, VFZC32N specifications

The United States Stove Company has long been recognized for its quality heating solutions, and the VFZC32N and VFZC32L models exemplify this commitment to excellence. These freestanding vent-free zone heaters are designed to provide efficient and effective heating for residential spaces, showcasing advanced technologies and user-friendly features.

The VFZC32N model, with its natural gas configuration, and the VFZC32L, which operates on propane, offer impressive heating capabilities. Both models can effectively heat areas up to 1,200 square feet, making them suitable for various room sizes in homes, garages, or workshops. They feature a clean, modern design that complements contemporary and traditional decor alike, with a sleek finish that enhances any interior space.

One of the standout characteristics of these heaters is their high-efficiency rating. With a 99% thermal efficiency, the VFZC32 series maximizes heat output while minimizing fuel consumption. This efficiency not only leads to lower energy bills but also results in a more eco-friendly heating solution. The vent-free technology allows these units to operate without the need for venting, simplifying the installation process and providing more flexibility in placement.

Safety features are a priority in the VFZC32N and VFZC32L models. Both heaters come equipped with an oxygen depletion sensor (ODS) that automatically shuts off the heater if oxygen levels fall below a safe threshold. Additionally, the built-in thermostat ensures optimal temperature control, allowing for consistent and comfortable heat throughout the space.

User convenience is further enhanced by the electronic ignition system, which provides hassle-free startups without the need for manual lighting. The adjustable flame height allows users to customize the heat output to suit their specific needs, while the easy-access control panel ensures straightforward operation.

In conclusion, the United States Stove VFZC32N and VFZC32L models represent an excellent choice for those seeking reliable and efficient heating solutions. With their impressive efficiency, modern design, and advanced safety features, these vent-free heaters make it easier than ever to enjoy warmth and comfort at home. Whether you are looking to heat a single room or a larger space, the VFZC32 series is certainly worth considering for your heating needs.
Top Page Image Contents