load envelopes
load envelopes
Use the print feature of your software to print to envelopes with your HP Officejet. Your HP Officejet provides two methods for working with envelopes. Do not use shiny or embossed envelopes, or envelopes that have clasps or windows.
•If you are printing one envelope,
slide the envelope into the envelope slot, which is located on the right side toward the back of the output tray. Insert the envelope with the flap up and on the left, as shown in the illustration. Slide the envelope on the top until it stops.
•If you are printing multiple
envelopes, remove all paper from
the paper tray. Slide a stack of envelopes into the tray, with the envelope flaps up and to the left
Adjust the paper-width guide
against the envelopes (be careful not to bend the envelopes). Make sure the envelopes fit within the tray
(do not overload it).
Consult the help files in your
tips for loading other types of paper in the paper tray
This section provides guidelines for loading special types of paper and transparency film. For best results, adjust the paper settings each time you change paper types and paper sizes. For more information, see set the paper type on page 10.
HP Inkjet
Flatten the transfer sheet completely before using it; do not load curled sheets. To prevent curling, keep transfer sheets sealed in the original package until you are ready to use them. Manually feed one sheet at a time, with the unprinted side facing down and the blue stripe facing up.
HP Premium or Premium Plus Inkjet Transparency Film
Insert the film so that the white transparency strip with arrows and the HP logo is on top and goes into the tray first.
9