United States Stove 3700PB, 3500PB owner manual Factory Built Chimney

Page 9

Factory Built Chimney

When a metal prefabricated chimney is used, the manufacturer’s installation instructions must be followed. You must also purchase (from the same manufacturer) and install the ceiling support package or wall pass-through and “T” section package, firestops (where needed), insulation shield, roof flashing, chimney cap, etc. Maintain proper clearance to the structure as recommended by the manufacturer. The chimney must be the required height above the roof or other obstructions for safety and proper draft operation.

9

Image 9
Contents Cast Iron Room Heater Table of Contents Stove Safety Before installing your stove SpecificationsAdequate Provision of Air Floor Protection Installation3500, 3500PB 3700, 3700PB Installation ClearancesChimney Connection Do not use the connector pipe as a chimneyChimney Height ChimneyFactory Built Chimney Masonry Chimney Combustible Wall Chimney Connector Pass-Throughs Fuel Operating Your StoveFirst operation of stove Air controlsRefueling Ash RemovalOvernight Burning Care of Glass Stove MaintenanceTrouble Shooting Fire Burns too Quickly Smoke in RoomStove Limited Warranty Warranty Policy & Procedures12 13 14 3500, 3500PB Parts Diagram & List410 3700, 3700PB Parts Diagram & ListUssc