United States Stove 2927 owner manual Chimney Connection, Heater

Page 5

AUTOMATIC COAL BURNING MODEL 2927 - EXTERIOR

REPAIR PARTS

 

 

CIRCULATOR

2

1

16

3

13

4

CHIMNEY CONNECTION

Two basic types of chimneys are approved for use with solid fuel: Factory-built and masonry. Factory-built chimney must comply with UL103HT standard.

Do not expect your stove or furnace to create draft. Draft is not a function of the appliance. Draft is purely a function of the chimney. Modern stoves and furnaces are much more airtight and efficient than those of the past; and, therefore require greater draft. A minimum of .05, measured in water column (gauges to measure chimney draft are readily available at stove shops and are economical to purchase or rent) is required for proper drafting to prevent back-puffing, smoke spillage, and to maximize performance.

Chimneys perform two functions - one of which is apparent: The chimney provides a means for exhausting smoke and flue gases resulting from combustion of the fuel. Secondarily, though, the chimney provides "Draft" which allows oxygen to be continuously introduced into the appliance, so that proper combustion is possible. As of April 1, 1987, all heaters and furnaces manufactured by United States Stove Company should be installed using a factory built chimney that meets the "Type HT" requirement of UL 103 (when a factory - built chimney is used).

IMPORTANT

*Size the chimney to the flue outlet on the stove. (6" outlet = 6" I.D. chimney) *Avoid using elbows except as necessary (they reduce draft).

*Make sure all horizontal runs of connector pipe go up hill (1/4" elevation for each horizontal foot).

 

 

14

HEATER

15

7

 

 

21

 

 

11

10 20

19 12

17

5

6 18

8

9

22

FLUE CONNECTION - NON-COMBUSTIBLE WALL

COLLAR

THIMBLE

 

PIPE

 

ELBOW

 

PIPE

 

FLOOR PROTECTOR

NON-COMBUSTIBLE

WALL

 

 

2 FT MIN.

10 FT.

3 FT.

MIN.

 

REFER TO CHIMNEY

MANUFACTURERS PARTS

AND INSTRUCTIONS

PIPE

FLOOR PROTECTOR

Fig. 5

Fig. 6

16

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Safety Notice HOW to Order Repair PartsTools Materials Circulator DimensionsTools and Material Needed Cur Rules for Safe Installation and OperationAS a Location is SELECTED, Keep the Following in Mind Locating the HeaterHeater Chimney ConnectionModel Number See Repair Parts List Repair Parts Automatic Coal Burning Circulator HeaterVenting Into a Fireplace Description QTYInstructions for TWO-STEP Latch Operation Fireplace InstallationChimney Maintenance CREOSOTE-FORMATION and Need for Removal Service HintsTwo 90 degree bends be used Trouble Shooting Tips for ModelOperating Instruc Tions Adjusting the Thermostat

2927 specifications

The United States Stove 2927 is a highly efficient and versatile wood-burning stove designed to provide warmth and comfort to your home. This model stands out in the market due to its robust construction and a variety of advanced features that cater to both performance and aesthetics. Crafted with high-quality materials, the 2927 is built to last, ensuring many winters of reliable heating.

One of the hallmark features of the United States Stove 2927 is its impressive heat output. With a heating capacity of up to 1,500 square feet, this stove is ideal for medium to large-sized spaces. The efficient airflow system maximizes combustion, allowing for more heat to be generated from less wood. This efficiency not only minimizes fuel consumption but also contributes to a reduction in emissions, making it an environmentally responsible way to heat your home.

The 2927 is equipped with a large firebox that facilitates extended burn times. This means less frequent reloading, which is a significant advantage for busy households. The advanced latch system on the door ensures a tight seal, enhancing safety and efficiency by preventing smoke from escaping into your living area. Additionally, the glass door allows you to enjoy the ambiance created by the dancing flames while also providing a visual confirmation of the fire’s status.

Another standout characteristic of the United States Stove 2927 is its advanced secondary combustion technology. This feature works to burn off excess gases and particulates before they are released into the atmosphere, promoting cleaner emissions and more efficient fuel use. The air control lever allows users to easily adjust airflow, facilitating optimal burn performance based on specific heating needs.

Installation is made easier with the adjustable flue collar, which can be configured for both top and rear venting options. The stove’s stylish design, complete with a modern finish, means it can seamlessly integrate with various home décors, adding aesthetic value to your space.

In summary, the United States Stove 2927 combines durability with innovative heating technology, making it a reliable choice for homeowners seeking an efficient wood-burning solution. With its ample heating capacity, extended burn times, and user-friendly features, this stove provides warmth and comfort while also being mindful of the environment.
Top Page Image Contents