2.Remove the new filter from the packaging;
3.Turn the date indicator disk (see fig. 29) until the next 2 months of use are displayed (the filter lasts about two months);
4.Refill the tank;
5.Insert the filter in the water tank and immerse it completely, sloping it to enable the air bubbles to escape (fig. 30);
6.Place the filter in the filter housing (fig. 31A) and press as far as it will go. Close the tank with the lid (fig. 31B), then replace the tank in the machine;
7.Position a container with a minimum capacity of 3.4 oz / 100 ml under the hot water spout;
8.Press the P button to enter the menu;
9.Turn the selection knob (fig. 7) until “Replace “ is displayed;
10.Press the 
button;
11.The message “Confirm?” is displayed;
12.Press the 
button to confirm the selection; 
13.“Hot Water… Confirm?” is displayed.
14.Press the 
button to confirm the selection. The appliance begins delivering hot water and the message “Please Wait... “ is displayed.
15.After delivery, the appliance returns automatically to the “Ready for coffee”
position.
The new filter is now active and you can use the coffee maker.
Removing the filter
If you want to continue using the appliance without a filter, you must remove it and notify the appliance of its removal as follows:
1.Extract the tank and exhausted filter;
2.Press the P button to enter the menu;
3.Turn the selection knob (fig. 7) until “Install filter*” is displayed;
4.Press the 
button;
5.“Deactivate?” is displayed;
6.Press the 
button to confirm and the
button
to exit the menu.
TECHNICAL SPECIFICATION
Voltage: | 120V~ 60Hz |
Absorbed power: | 1250W |
Pressure: | 15 bars |
Water tank capacity: | 60 fl oz max |
Size LxHxD: | 9.4x13.8x16.9 in |
Cable length: | 3.5 ft |
Weight: | 20,22 lb. |
Beans container capacity: | 8.8 oz max |
20
