Toshiba DP125F, Dp120F manual Transmit Configuration, Document Specifications

- TRANSMIT CONFIGURATION

Document Specifications

The following table shows the specifications for original documents that can be used with the facsimile.

			Single Sheet		Multiple Sheets
	Max.		216mm(W) x 1000mm(L)
			[8.5 in.(W) x 39.37 in.(L)]
Document
Size	Min.		148mm(W) x 100mm(L)
			[5.83 in.(W) x 3.94 in.(L)]
Effective Scanning				214mm
Width				[8.4 in.]
Max. Capacity of					Up to 20 sheets (Legal Size)
Document Tray					Up to 50 sheets (Letter Size)
Thickness of			0.05 to 0.15 mm		0.06 to 0.12 mm
Document		[0.002 to 0.0059 in.]			[0.0025 to 0.0047 in.]
Type of Paper			Uncoated on both sides

NOTES:

•Operator assistance may be required for pages longer than 420mm (16.5 inches).

•For multiple sheets, the documents must be the same size and paper type.

•A small border region of each document is not imaged when each document is scanned. The effective scanning area is as shown in the figure below.

Caution:

If the documents are any of the following, they should be copied to plain paper before transmitting.

•Torn, wrinkled, or damp pages

•Folded pages or pages with holes

•Transparent pages or pages with a smooth, shiny finish

•Cloth or metal sheets

When using originals with the following specifications, use a carrier sheet to avoid document jams or misfeeds. When using carrier sheets, only one sheet can be sent at a time.

•Smaller than minimum size.

•With thickness less than 0.05 mm.

To use a carrier sheet, lift the clear cover, place a single document sheet face-up on the paper sheet. Purchase carrier sheets from your TOSHIBA facsimile dealer or use a transparency with a paper backing attached at the lead edge.

Letter/Legal Size

216 mm (8.5 inches)

Effective

Scanning

Area

Max. 4 mm (0.16 inches)

Max. 2.5 mm (0.1 inches)

214 mm (8.4 inches)

87