Toshiba DP125F, Dp120F manual New Toner Cartridge

Toner Cartridge Replacement - continued

5 Prepare a New Toner Cartridge

6 Install the New	7 Remove the Strip	Attach the Drum Unit	Install the Developer
		8 to the Developer	9 Assembly with Drum
Toner Cartridge		Assembly	Unit

New Toner

Cartridge

054

Remove the new Toner Car- tridge from its plastic bag and save the bag for the used Toner Cartridge.

Mix the new toner by shaking the Toner Cartridge back and forth.

NOTE:

Only use the specified TOSHIBA Toner Cartridge.

New Toner

Cartridge

	Developer
055	Assembly

Align the four hooks on the new Toner Cartridge with the slots on the Developer Assembly. Slide the cartridge onto the as- sembly.

Move the cartridge to the right until the button on the left of the Developer Assembly clicks into place.

Developer

Assembly

Strip

041

Holding the Developer Assem- bly with one hand, grasp the end of the protective strip under the toner housing. Pull the Strip firmly to completely remove it from the cartridge.

NOTES:

•Do not stand or turn the Developer Assembly up side down to avoid toner leaking out the cartridge after removing the strip.

•Toner might stick to the strip. Avoid toner sticking to your clothes, furniture, or other items since the toner cannot be removed easily. Toner is not harm- ful to the human body. If any toner sticks to your clothes, wash away the toner immediately using cold water.

	Drum Unit
	Developer
042	Assembly

Attach the Drum Unit to the De- veloper Assembly. Position the Drum Unit with the green drum surface facing the black toner roller on the Developer Assem- bly.

Developer

Assembly

043

Holding the Developer Assem- bly by the green handles, align the three shafts on the Devel- oper Assembly sides with the slots in the machine frame.

29